32013 4t-32013X Hr32013xj 32013jr E32013j 32013-X Tapered/Taper Roller Bearing for Reducer Automobile Construction Machinery Agricultural Machinery Transmission
How do I place BEARING SUDAMERICANA,S.A. an EMERGENCY order for a 32013 4t-32013X Hr32013xj 32013jr E32013j 32013-X Tapered/Taper Roller Bearing for Reducer Automobile Construction Machinery Agricultural Machinery Transmission that I Powder Coat finish/coating: want 1.3400 in base height: to pick up at a our store?
Model Number: | 32013 |
GPM @ 1,800 rpm, Cover End: | 76.0 LB |
Port Size: | Flange Mount |
Shaft Length: | Left Hand (CCW) |
Shaft Key: | 3525VQ38A21-1AD20LH |
Shaft Dia.: | 3 |
Port Orientation - Shaft End: | Flange |
Mounting: | 5/16 in |
Cover End Flow @ RPM: | Standard Pilot |
Product Details
GPM @ 1,800 rpm, Cover End | 76.0 LB |
Port Size | Flange Mount |
Shaft Length | Left Hand (CCW) |
Shaft Key | 3525VQ38A21-1AD20LH |
Shaft Dia. | 3 |
Port Orientation - Shaft End | Flange |
Mounting | 5/16 in |
Cover End Flow @ RPM | Standard Pilot |
Max. RPM [Max | 1.25 in |
Minor Diameter [Min | Straight w/ Key |
Displacement Cover End (cu in/revolution) | 3525VQ |
Cover End RPM [Max | 2.5 in |
Port Type | Buna-N |
Pump Series | 2400 |
Shaft Seal Type | N/A |
Cover End Pressure [Max | SAE C, 2 Bolt |
Manufacturer Part No. | Single Shaft Seal |
Shaft End Flow @ RPM | N/A |
Minor Diameter [Max | 2500 |
Controlled Flow Rate | 2400 |
Displacement Shaft End (cu in/revolution) | N/A |
Spline Description | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Model No. | N/A |
Weight | N/A |
Pilot Type | N/A |
Mounting Flange | N/A |
Rotation | N/A |
Relief Valve Setting | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Major Diameter [Min | 3525VQ38A21-1AD20LH |
Minor Diameter | 3000 |
Pressure Port Size, Shaft End | 3000 |
Shaft End Pressure [Max | 31.5 |
Seal Material | 57 |
Shaft Type | w/o Integral Valves |
Shaft End RPM [Max | Outlet 135° CW from Inlet |
Integral Valve Configuration | Outlet Opposite Inlet |
Port Orientation - Cover End | 1 in Flange |
GPM @ 1,800 rpm, Shaft End | 1 1/4 in Flange |
Major Diameter [Max | 4.12 |
Pressure Port Size, Cover End | 7.42 |