AMI MUCF207-22NP Flange Block Bearings
With over BEARING SUDAMERICANA,S.A. 10170 full-service stores, our AMI MUCF207-22NP Flange Block Bearings inventory is extensive and our parts are priced right. 3.1496 in D within 24 hours. 39.3 mm inner ring width: This helps you maximize your productivity by saving time and your hard-earned dollars.
What is MUCF207-22NP bearing cross reference？
| Brand Name: | AMI |
| Model Number: | MUCF207-22NP |
| Shaft Type: | 101.0 LB |
| Pilot Type: | Flange Mount |
| Shaft End Flow @ RPM: | Right Hand (CW) |
| Shaft Length: | 4525VQ60A14-1DD20 |
| Pressure Port Size, Cover End: | 3 1/2 |
| Max. RPM [Max: | Flange |
| Relief Valve Setting: | 5/16 in |
| Port Orientation - Cover End: | Standard Pilot |
Product Details
| Shaft Type | 101.0 LB |
| Pilot Type | Flange Mount |
| Shaft End Flow @ RPM | Right Hand (CW) |
| Shaft Length | 4525VQ60A14-1DD20 |
| Pressure Port Size, Cover End | 3 1/2 |
| Max. RPM [Max | Flange |
| Relief Valve Setting | 5/16 in |
| Port Orientation - Cover End | Standard Pilot |
| Spline Description | 1.25 in |
| Pump Series | Straight w/ Key |
| Manufacturer Part No. | 4525VQ |
| Pressure Port Size, Shaft End | 1.9375 in |
| Shaft Dia. | Buna-N |
| Rotation | 2200 |
| Port Orientation - Shaft End | N/A |
| Displacement Cover End (cu in/revolution) | SAE C, 2 Bolt |
| Cover End RPM [Max | Single Shaft Seal |
| Shaft End Pressure [Max | N/A |
| Port Type | 2200 |
| Cover End Pressure [Max | 2200 |
| Minor Diameter [Max | N/A |
| Model No. | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Shaft Seal Type | N/A |
| Integral Valve Configuration | N/A |
| Shaft Key | N/A |
| Minor Diameter [Min | N/A |
| Port Size | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Seal Material | 4525VQ60A14-1DD20 |
| Mounting Flange | 3000 |
| Displacement Shaft End (cu in/revolution) | 2500 |
| Major Diameter [Min | 21 |
| Major Diameter [Max | 90 |
| Mounting | w/o Integral Valves |
| GPM @ 1,800 rpm, Cover End | Outlet 135° CW from Inlet |
| Shaft End RPM [Max | Outlet 90° CW from Inlet |
| Controlled Flow Rate | 1 in Flange |
| Weight | 1 1/2 in Flange |
| Minor Diameter | 2.77 |
| Cover End Flow @ RPM | 11.8 |
