AMI MUCHPL202-10B Hanger Unit Bearings
How do BEARING SUDAMERICANA,S.A. 80 mm inside diameter: you find the 811, 894, 893, 812 compatible bearing part number: AMI MUCHPL202-10B Hanger Unit Bearings specification? Manufacturers Online Free 105 mm D check！
What is MUCHPL202-10B bearing interchange？
| Brand Name: | AMI |
| Model Number: | MUCHPL202-10B |
| Controlled Flow Rate: | 75.0 LB |
| Model No.: | Flange Mount |
| Pump Series: | Left Hand (CCW) |
| Major Diameter [Max: | 3520VQ35A5-1CC20-LH |
| Port Orientation - Shaft End: | 3 |
| Manufacturer Part No.: | Flange |
| Rotation: | 5/16 in |
| Mounting: | Standard Pilot |
Product Details
| Controlled Flow Rate | 75.0 LB |
| Model No. | Flange Mount |
| Pump Series | Left Hand (CCW) |
| Major Diameter [Max | 3520VQ35A5-1CC20-LH |
| Port Orientation - Shaft End | 3 |
| Manufacturer Part No. | Flange |
| Rotation | 5/16 in |
| Mounting | Standard Pilot |
| Relief Valve Setting | 1.25 in |
| Seal Material | Straight w/ Key |
| Cover End Flow @ RPM | 3520VQ |
| Shaft End Pressure [Max | 2.5 in |
| Cover End RPM [Max | Buna-N |
| Integral Valve Configuration | 2400 |
| Cover End Pressure [Max | N/A |
| Pressure Port Size, Shaft End | SAE C, 2 Bolt |
| Shaft Type | Single Shaft Seal |
| Shaft Length | N/A |
| Max. RPM [Max | 2500 |
| Spline Description | 2400 |
| Pilot Type | N/A |
| GPM @ 1,800 rpm, Cover End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Major Diameter [Min | N/A |
| Minor Diameter [Max | N/A |
| Shaft Key | N/A |
| Weight | N/A |
| Shaft End RPM [Max | N/A |
| Minor Diameter [Min | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End | 3520VQ35A5-1CC20-LH |
| GPM @ 1,800 rpm, Shaft End | 3000 |
| Shaft Seal Type | 3000 |
| Port Orientation - Cover End | 7.5 |
| Shaft Dia. | 52.5 |
| Port Size | w/o Integral Valves |
| Displacement Cover End (cu in/revolution) | Outlet 45° CW from Inlet |
| Minor Diameter | Outlet Inline w/Inlet |
| Mounting Flange | 3/4 in Flange |
| Port Type | 1 1/4 in Flange |
| Displacement Shaft End (cu in/revolution) | 1.1 |
| Shaft End Flow @ RPM | 6.88 |
