AMI MUCHPL206-20CW Hanger Unit Bearings
AMI MUCHPL206-20CW Hanger Unit Bearings Needs Analysis 1.0625 in d Two-Bolt Flange mounting type: , AMI Bearing BEARING SUDAMERICANA,S.A. Manufacturing Service . Cast Iron housing material: Get Your Free.
What is MUCHPL206-20CW bearing interchange？
| Brand Name: | AMI |
| Model Number: | MUCHPL206-20CW |
| Seal Material: | 45.0 LB |
| Shaft End Pressure [Max: | Flange Mount |
| Rotation: | Left Hand (CCW) |
| GPM @ 1,800 rpm, Shaft End: | 2520VQ14E14-11CC20-LH |
| GPM @ 1,800 rpm, Cover End: | 2.5 |
| Model No.: | Flange |
| Major Diameter [Max: | N/A |
| Weight: | Standard Pilot |
Product Details
| Seal Material | 45.0 LB |
| Shaft End Pressure [Max | Flange Mount |
| Rotation | Left Hand (CCW) |
| GPM @ 1,800 rpm, Shaft End | 2520VQ14E14-11CC20-LH |
| GPM @ 1,800 rpm, Cover End | 2.5 |
| Model No. | Flange |
| Major Diameter [Max | N/A |
| Weight | Standard Pilot |
| Minor Diameter | 0.875 in |
| Shaft Length | 13 Tooth Splined |
| Max. RPM [Max | 2520VQ |
| Shaft Dia. | 1 3/8 in |
| Minor Diameter [Min | Double |
| Cover End Flow @ RPM | Buna-N |
| Port Size | 2700 |
| Mounting | 0.715 in |
| Mounting Flange | SAE B, 2 Bolt |
| Pressure Port Size, Shaft End | Single Shaft Seal |
| Spline Description | 16/32 |
| Shaft End Flow @ RPM | 2700 |
| Shaft Key | 2700 |
| Port Type | N/A |
| Port Orientation - Shaft End | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Controlled Flow Rate | 0.873 in |
| Pilot Type | 0.872 in |
| Minor Diameter [Max | N/A |
| Shaft Type | N/A |
| Displacement Shaft End (cu in/revolution) | 2.8 |
| Displacement Cover End (cu in/revolution) | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Shaft Seal Type | 2520VQ14E14-11CC20-LH |
| Pump Series | 2000 |
| Cover End RPM [Max | 3000 |
| Shaft End RPM [Max | 21 |
| Port Orientation - Cover End | 21 |
| Manufacturer Part No. | w/o Integral Valves |
| Pressure Port Size, Cover End | Outlet 45° CW from Inlet |
| Major Diameter [Min | Outlet Inline w/Inlet |
| Relief Valve Setting | 1 1/16 in SAE O-Ring |
| Cover End Pressure [Max | 1 in Flange |
| Integral Valve Configuration | 2.8 |
