AMI MUCHPL202-10B Hanger Unit Bearings
How do BEARING SUDAMERICANA,S.A. 80 mm inside diameter: you find the 811, 894, 893, 812 compatible bearing part number: AMI MUCHPL202-10B Hanger Unit Bearings specification? Manufacturers Online Free 105 mm D check！
What is MUCHPL202-10B bearing interchange？
| Brand Name: |
AMI |
| Model Number: |
MUCHPL202-10B |
| Controlled Flow Rate: |
75.0 LB |
| Model No.: |
Flange Mount |
| Pump Series: |
Left Hand (CCW) |
| Major Diameter [Max: |
3520VQ35A5-1CC20-LH |
| Port Orientation - Shaft End: |
3 |
| Manufacturer Part No.: |
Flange |
| Rotation: |
5/16 in |
| Mounting: |
Standard Pilot |
Product Details
| Controlled Flow Rate |
75.0 LB |
| Model No. |
Flange Mount |
| Pump Series |
Left Hand (CCW) |
| Major Diameter [Max |
3520VQ35A5-1CC20-LH |
| Port Orientation - Shaft End |
3 |
| Manufacturer Part No. |
Flange |
| Rotation |
5/16 in |
| Mounting |
Standard Pilot |
| Relief Valve Setting |
1.25 in |
| Seal Material |
Straight w/ Key |
| Cover End Flow @ RPM |
3520VQ |
| Shaft End Pressure [Max |
2.5 in |
| Cover End RPM [Max |
Buna-N |
| Integral Valve Configuration |
2400 |
| Cover End Pressure [Max |
N/A |
| Pressure Port Size, Shaft End |
SAE C, 2 Bolt |
| Shaft Type |
Single Shaft Seal |
| Shaft Length |
N/A |
| Max. RPM [Max |
2500 |
| Spline Description |
2400 |
| Pilot Type |
N/A |
| GPM @ 1,800 rpm, Cover End |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Major Diameter [Min |
N/A |
| Minor Diameter [Max |
N/A |
| Shaft Key |
N/A |
| Weight |
N/A |
| Shaft End RPM [Max |
N/A |
| Minor Diameter [Min |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End |
3520VQ35A5-1CC20-LH |
| GPM @ 1,800 rpm, Shaft End |
3000 |
| Shaft Seal Type |
3000 |
| Port Orientation - Cover End |
7.5 |
| Shaft Dia. |
52.5 |
| Port Size |
w/o Integral Valves |
| Displacement Cover End (cu in/revolution) |
Outlet 45° CW from Inlet |
| Minor Diameter |
Outlet Inline w/Inlet |
| Mounting Flange |
3/4 in Flange |
| Port Type |
1 1/4 in Flange |
| Displacement Shaft End (cu in/revolution) |
1.1 |
| Shaft End Flow @ RPM |
6.88 |