AMI MUCHPL206-20CW Hanger Unit Bearings
AMI MUCHPL206-20CW Hanger Unit Bearings Needs Analysis 1.0625 in d Two-Bolt Flange mounting type: , AMI Bearing BEARING SUDAMERICANA,S.A. Manufacturing Service . Cast Iron housing material: Get Your Free.
What is MUCHPL206-20CW bearing interchange？
| Brand Name: |
AMI |
| Model Number: |
MUCHPL206-20CW |
| Seal Material: |
45.0 LB |
| Shaft End Pressure [Max: |
Flange Mount |
| Rotation: |
Left Hand (CCW) |
| GPM @ 1,800 rpm, Shaft End: |
2520VQ14E14-11CC20-LH |
| GPM @ 1,800 rpm, Cover End: |
2.5 |
| Model No.: |
Flange |
| Major Diameter [Max: |
N/A |
| Weight: |
Standard Pilot |
Product Details
| Seal Material |
45.0 LB |
| Shaft End Pressure [Max |
Flange Mount |
| Rotation |
Left Hand (CCW) |
| GPM @ 1,800 rpm, Shaft End |
2520VQ14E14-11CC20-LH |
| GPM @ 1,800 rpm, Cover End |
2.5 |
| Model No. |
Flange |
| Major Diameter [Max |
N/A |
| Weight |
Standard Pilot |
| Minor Diameter |
0.875 in |
| Shaft Length |
13 Tooth Splined |
| Max. RPM [Max |
2520VQ |
| Shaft Dia. |
1 3/8 in |
| Minor Diameter [Min |
Double |
| Cover End Flow @ RPM |
Buna-N |
| Port Size |
2700 |
| Mounting |
0.715 in |
| Mounting Flange |
SAE B, 2 Bolt |
| Pressure Port Size, Shaft End |
Single Shaft Seal |
| Spline Description |
16/32 |
| Shaft End Flow @ RPM |
2700 |
| Shaft Key |
2700 |
| Port Type |
N/A |
| Port Orientation - Shaft End |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Controlled Flow Rate |
0.873 in |
| Pilot Type |
0.872 in |
| Minor Diameter [Max |
N/A |
| Shaft Type |
N/A |
| Displacement Shaft End (cu in/revolution) |
2.8 |
| Displacement Cover End (cu in/revolution) |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Shaft Seal Type |
2520VQ14E14-11CC20-LH |
| Pump Series |
2000 |
| Cover End RPM [Max |
3000 |
| Shaft End RPM [Max |
21 |
| Port Orientation - Cover End |
21 |
| Manufacturer Part No. |
w/o Integral Valves |
| Pressure Port Size, Cover End |
Outlet 45° CW from Inlet |
| Major Diameter [Min |
Outlet Inline w/Inlet |
| Relief Valve Setting |
1 1/16 in SAE O-Ring |
| Cover End Pressure [Max |
1 in Flange |
| Integral Valve Configuration |
2.8 |