AMI UCP202-10TCMZ2 Pillow Block Bearings
QuestionAMI UCP202-10TCMZ2 Pillow Block Bearings ? Find 1700 lb radial dynamic load capacity: what you need faster BEARING SUDAMERICANA,S.A. by entering your AMI Bearing information 5-3/4 in inner ring width: .
What is UCP202-10TCMZ2 bearing interchange？
| Brand Name: |
AMI |
| Model Number: |
UCP202-10TCMZ2 |
| Shaft End Pressure [Max: |
35.0 LB |
| Seal Material: |
Flange Mount |
| GPM @ 1,800 rpm, Shaft End: |
Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End: |
V2020-1F13S9S-1BB30 |
| Port Orientation - Cover End: |
2 |
| Displacement Cover End (cu in/revolution): |
Flange |
| Pressure Port Size, Shaft End: |
3/16 in |
| Shaft End RPM [Max: |
N/A |
Product Details
| Shaft End Pressure [Max |
35.0 LB |
| Seal Material |
Flange Mount |
| GPM @ 1,800 rpm, Shaft End |
Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End |
V2020-1F13S9S-1BB30 |
| Port Orientation - Cover End |
2 |
| Displacement Cover End (cu in/revolution) |
Flange |
| Pressure Port Size, Shaft End |
3/16 in |
| Shaft End RPM [Max |
N/A |
| Shaft Seal Type |
0.875 in |
| Shaft Length |
Straight w/ Key |
| Weight |
V2020 |
| Shaft Type |
2 5/16 in |
| Major Diameter [Max |
Double |
| Controlled Flow Rate |
Buna-N |
| Pump Series |
2400 |
| Relief Valve Setting |
N/A |
| Rotation |
SAE B, 2 Bolt |
| Spline Description |
Single Shaft Seal |
| Pilot Type |
N/A |
| Mounting |
2800 |
| Integral Valve Configuration |
2400 |
| Shaft End Flow @ RPM |
N/A |
| Port Type |
9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| Cover End RPM [Max |
N/A |
| Shaft Key |
N/A |
| Port Orientation - Shaft End |
N/A |
| Major Diameter [Min |
N/A |
| Displacement Shaft End (cu in/revolution) |
2.6 |
| Shaft Dia. |
13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End |
V2020-1F13S9S-1BB30 |
| Manufacturer Part No. |
2500 |
| Cover End Flow @ RPM |
2200 |
| Port Size |
13.5 |
| Minor Diameter |
19.5 |
| Model No. |
N/A |
| Minor Diameter [Max |
Outlet 90° CCW from Inlet |
| Minor Diameter [Min |
Outlet 90° CCW from Inlet |
| Max. RPM [Max |
3/4 in SAE O-Ring |
| Mounting Flange |
3/4 in SAE O-Ring |
| Cover End Pressure [Max |
1.8 |