| Shaft Length |
76.0 LB |
| Manufacturer Part No. |
Flange Mount |
| Shaft End Pressure [Max |
Left Hand (CCW) |
| Minor Diameter [Max |
3525VQ30A21-11DC20-LH |
| Spline Description |
3 |
| Minor Diameter [Min |
Flange |
| Shaft Dia. |
N/A |
| Displacement Cover End (cu in/revolution) |
Standard Pilot |
| Minor Diameter |
1.25 in |
| Shaft Key |
14 Tooth Splined |
| Pressure Port Size, Cover End |
3525VQ |
| Relief Valve Setting |
1.9375 in |
| Pump Series |
Double |
| Port Orientation - Cover End |
Buna-N |
| Major Diameter [Min |
2500 |
| Pilot Type |
1.04 in |
| Shaft Type |
SAE C, 2 Bolt |
| Max. RPM [Max |
Single Shaft Seal |
| Pressure Port Size, Shaft End |
12/24 |
| Shaft End RPM [Max |
2500 |
| Displacement Shaft End (cu in/revolution) |
6 |
| Integral Valve Configuration |
N/A |
| Weight |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Controlled Flow Rate |
1.248 in |
| Mounting |
1.247 in |
| Cover End Flow @ RPM |
N/A |
| Seal Material |
N/A |
| Shaft End Flow @ RPM |
N/A |
| Model No. |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
3525VQ30A21-11DC20-LH |
| Port Type |
3000 |
| Cover End RPM [Max |
3000 |
| GPM @ 1,800 rpm, Cover End |
31.5 |
| Mounting Flange |
45 |
| Rotation |
w/o Integral Valves |
| Port Size |
Outlet 45° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End |
Outlet 90° CW from Inlet |
| Cover End Pressure [Max |
1 in Flange |
| Major Diameter [Max |
1 1/4 in Flange |
| Shaft Seal Type |
4.1 |