| Weight |
45.0 LB |
| Spline Description |
Flange Mount |
| Cover End RPM [Max |
Left Hand (CCW) |
| Pressure Port Size, Cover End |
2520VQ17A14-11BC20-LH |
| Major Diameter [Max |
2.5 |
| Shaft Type |
Flange |
| Port Orientation - Cover End |
N/A |
| Relief Valve Setting |
Standard Pilot |
| Cover End Flow @ RPM |
0.875 in |
| Shaft Dia. |
13 Tooth Splined |
| Minor Diameter [Min |
2520VQ |
| GPM @ 1,800 rpm, Shaft End |
1 3/8 in |
| Model No. |
Double |
| Mounting |
Buna-N |
| Pilot Type |
2500 |
| Integral Valve Configuration |
0.715 in |
| Cover End Pressure [Max |
SAE B, 2 Bolt |
| Rotation |
Single Shaft Seal |
| Displacement Cover End (cu in/revolution) |
16/32 |
| Controlled Flow Rate |
2700 |
| Shaft Length |
2500 |
| Seal Material |
N/A |
| Shaft Seal Type |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Max. RPM [Max |
0.873 in |
| Port Type |
0.872 in |
| Shaft End Flow @ RPM |
N/A |
| Pump Series |
N/A |
| Pressure Port Size, Shaft End |
N/A |
| Shaft End Pressure [Max |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Port Size |
2520VQ17A14-11BC20-LH |
| Mounting Flange |
2000 |
| Shaft Key |
3000 |
| Port Orientation - Shaft End |
21 |
| Minor Diameter [Max |
25.5 |
| Manufacturer Part No. |
w/o Integral Valves |
| Major Diameter [Min |
Outlet 45° CW from Inlet |
| Minor Diameter |
Outlet 90° CCW from Inlet |
| Displacement Shaft End (cu in/revolution) |
3.4 |
| Shaft End RPM [Max |
1 in Flange |
| GPM @ 1,800 rpm, Cover End |
2.8 |