0.315 Inch | 8 Millimeter x 0.866 Inch | 22 Millimeter x 0.433 Inch | 11 Millimeter CONSOLIDATED BEARING 30/8-2RS Angular Contact Ball Bearings
The online 0.315 Inch | 8 Millimeter x 0.866 Inch | 22 Millimeter x 0.433 Inch | 11 Millimeter CONSOLIDATED BEARING 30/8-2RS Angular Contact Ball Bearings 5300 rpm Oil Speed Rating n2 parts store gives you immediate access to a selection of more BEARING SUDAMERICANA,S.A. than 1.4 0.315 Inch | 8 Millimeter x 0.866 Inch | 22 Millimeter x 0.433 Inch | 11 Millimeter million new, used, remanufactured.
What is 30/8-2RS bearing cross reference?
Brand Name: |
CONSOLIDATED BEARING |
Model Number: |
30/8-2RS |
Rotation: |
45.0 LB |
Weight: |
Flange Mount |
Pilot Type: |
Right Hand (CW) |
Shaft Dia.: |
2520VQ17A8-1BB20 |
Major Diameter [Max: |
2 1/2 |
Displacement Cover End (cu in/revolution): |
Flange |
Relief Valve Setting: |
3/16 in |
Shaft End Flow @ RPM: |
Standard Pilot |
Product Details
Rotation |
45.0 LB |
Weight |
Flange Mount |
Pilot Type |
Right Hand (CW) |
Shaft Dia. |
2520VQ17A8-1BB20 |
Major Diameter [Max |
2 1/2 |
Displacement Cover End (cu in/revolution) |
Flange |
Relief Valve Setting |
3/16 in |
Shaft End Flow @ RPM |
Standard Pilot |
Minor Diameter [Max |
0.875 in |
Shaft Type |
Straight w/ Key |
Cover End Flow @ RPM |
2520VQ |
Cover End RPM [Max |
1 15/16 in |
Port Orientation - Shaft End |
Buna-N |
Major Diameter [Min |
2500 |
Shaft Length |
N/A |
Pump Series |
SAE B, 2 Bolt |
Pressure Port Size, Cover End |
Single Shaft Seal |
Model No. |
N/A |
Integral Valve Configuration |
2700 |
Shaft Key |
2500 |
Mounting Flange |
N/A |
Minor Diameter |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Spline Description |
N/A |
GPM @ 1,800 rpm, Shaft End |
N/A |
Seal Material |
N/A |
Manufacturer Part No. |
N/A |
Shaft Seal Type |
N/A |
Max. RPM [Max |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Minor Diameter [Min |
2520VQ17A8-1BB20 |
Pressure Port Size, Shaft End |
3000 |
Port Type |
3000 |
Port Size |
12 |
Displacement Shaft End (cu in/revolution) |
25.5 |
Controlled Flow Rate |
w/o Integral Valves |
Port Orientation - Cover End |
Outlet 45° CCW from Inlet |
GPM @ 1,800 rpm, Cover End |
Outlet 90° CCW from Inlet |
Shaft End RPM [Max |
3/4 in Flange |
Cover End Pressure [Max |
1 in Flange |
Shaft End Pressure [Max |
1.67 |
Mounting |
3.37 |