0.472 Inch | 12 Millimeter x 1.102 Inch | 28 Millimeter x 0.315 Inch | 8 Millimeter CONSOLIDATED BEARING 6001 P/6 Precision Ball Bearings
0.472 Inch | 12 Millimeter x 1.102 Inch | 28 Millimeter x 0.315 Inch | 8 Millimeter CONSOLIDATED BEARING 6001 P/6 Precision Ball Bearings Manufacturers , 0.472 Inch | 12 Millimeter x 1.102 Inch | 28 Millimeter x 0.315 Inch | 8 Millimeter Online Wholesale BEARING SUDAMERICANA,S.A. Suppliers ! 34000 r/min Reference speed
What is 6001 P/6 bearing cross reference？
| Brand Name: |
CONSOLIDATED BEARING |
| Model Number: |
6001 P/6 |
| Model No.: |
76.0 LB |
| Cover End Flow @ RPM: |
Flange Mount |
| Shaft Seal Type: |
Right Hand (CW) |
| Seal Material: |
3525VQ35A21-1CC20 |
| Displacement Cover End (cu in/revolution): |
3 |
| Shaft Length: |
Flange |
| Minor Diameter [Max: |
5/16 in |
| Weight: |
Standard Pilot |
Product Details
| Model No. |
76.0 LB |
| Cover End Flow @ RPM |
Flange Mount |
| Shaft Seal Type |
Right Hand (CW) |
| Seal Material |
3525VQ35A21-1CC20 |
| Displacement Cover End (cu in/revolution) |
3 |
| Shaft Length |
Flange |
| Minor Diameter [Max |
5/16 in |
| Weight |
Standard Pilot |
| Manufacturer Part No. |
1.25 in |
| Pressure Port Size, Cover End |
Straight w/ Key |
| Controlled Flow Rate |
3525VQ |
| Max. RPM [Max |
2.5 in |
| Pump Series |
Double |
| Cover End RPM [Max |
Buna-N |
| Major Diameter [Min |
2400 |
| Mounting Flange |
N/A |
| Relief Valve Setting |
SAE C, 2 Bolt |
| Shaft Dia. |
Single Shaft Seal |
| Port Type |
N/A |
| Minor Diameter |
2500 |
| Mounting |
2400 |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Pilot Type |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
N/A |
| Shaft End Flow @ RPM |
N/A |
| Port Size |
N/A |
| Shaft End Pressure [Max |
N/A |
| Spline Description |
N/A |
| Shaft End RPM [Max |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Port Orientation - Cover End |
3525VQ35A21-1CC20 |
| Cover End Pressure [Max |
3000 |
| Shaft Type |
3000 |
| Pressure Port Size, Shaft End |
31.5 |
| Port Orientation - Shaft End |
52.5 |
| GPM @ 1,800 rpm, Shaft End |
w/o Integral Valves |
| Shaft Key |
Outlet 45° CW from Inlet |
| Rotation |
Outlet Inline w/Inlet |
| Minor Diameter [Min |
1 in Flange |
| Displacement Shaft End (cu in/revolution) |
6.9 |
| Integral Valve Configuration |
4.1 |