CONSOLIDATED BEARING GE-120 SW Plain Bearings
Various BEARING SUDAMERICANA,S.A. CONSOLIDATED BEARING 80000 N Basic Static Radial Load Rating Co types and sizes to 1.50 mm Fillet Radius ra 4300 rpm Oil Speed Rating n2 accommodate your CONSOLIDATED BEARING GE-120 SW Plain Bearings requirements.
What is GE-120 SW bearing cross reference?
Brand Name: |
CONSOLIDATED BEARING |
Model Number: |
GE-120 SW |
Shaft End Pressure [Max: |
101.0 LB |
Shaft Length: |
Flange Mount |
Port Orientation - Cover End: |
Left Hand (CCW) |
Displacement Shaft End (cu in/revolution): |
4525VQ60A17-1DC20LH |
Shaft End RPM [Max: |
3 1/2 |
Relief Valve Setting: |
Flange |
Pressure Port Size, Shaft End: |
5/16 in |
Weight: |
Standard Pilot |
Product Details
Shaft End Pressure [Max |
101.0 LB |
Shaft Length |
Flange Mount |
Port Orientation - Cover End |
Left Hand (CCW) |
Displacement Shaft End (cu in/revolution) |
4525VQ60A17-1DC20LH |
Shaft End RPM [Max |
3 1/2 |
Relief Valve Setting |
Flange |
Pressure Port Size, Shaft End |
5/16 in |
Weight |
Standard Pilot |
Shaft Key |
1.25 in |
Cover End Flow @ RPM |
Straight w/ Key |
Major Diameter [Max |
4525VQ |
Minor Diameter [Min |
1 15/16 in |
Integral Valve Configuration |
Buna-N |
Spline Description |
2200 |
Port Size |
N/A |
Displacement Cover End (cu in/revolution) |
SAE C, 2 Bolt |
Rotation |
Single Shaft Seal |
Shaft Type |
N/A |
Minor Diameter [Max |
2200 |
Pressure Port Size, Cover End |
2200 |
GPM @ 1,800 rpm, Shaft End |
N/A |
Max. RPM [Max |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Port Type |
N/A |
Pilot Type |
N/A |
Seal Material |
N/A |
Mounting Flange |
N/A |
Manufacturer Part No. |
N/A |
Shaft Dia. |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
Pump Series |
4525VQ60A17-1DC20LH |
Cover End RPM [Max |
3000 |
Port Orientation - Shaft End |
2500 |
GPM @ 1,800 rpm, Cover End |
25.5 |
Cover End Pressure [Max |
90 |
Major Diameter [Min |
w/o Integral Valves |
Model No. |
Outlet 45° CW from Inlet |
Mounting |
Outlet 90° CW from Inlet |
Controlled Flow Rate |
1 in Flange |
Shaft End Flow @ RPM |
1 1/2 in Flange |
Minor Diameter |
3.37 |
Shaft Seal Type |
11.8 |