3.74 Inch | 95 Millimeter x 6.693 Inch | 170 Millimeter x 1.693 Inch | 43 Millimeter CONSOLIDATED BEARING NJ-2219E C/3 Cylindrical Roller Bearings
3.74 Inch | 95 Millimeter x 6.693 Inch | 170 Millimeter x 1.693 Inch | 43 Millimeter CONSOLIDATED BEARING NJ-2219E C/3 Cylindrical Roller Bearings Needs Analysis BEARING SUDAMERICANA,S.A. , CONSOLIDATED BEARING Manufacturing Service 296 kN Comparative axial load rating CFa . Get 3.74 Inch | 95 Millimeter x 6.693 Inch | 170 Millimeter x 1.693 Inch | 43 Millimeter Your Free. 395 kg Mass bearing
What is NJ-2219E C/3 bearing interchange？
| Brand Name: |
CONSOLIDATED BEARING |
| Model Number: |
NJ-2219E C/3 |
| Cover End Flow @ RPM: |
75.0 LB |
| Weight: |
Flange Mount |
| Pilot Type: |
Right Hand (CW) |
| Pump Series: |
3520VQ30A11-1DD20 |
| Displacement Shaft End (cu in/revolution): |
3 |
| Shaft End RPM [Max: |
Flange |
| Shaft End Pressure [Max: |
5/16 in |
| Manufacturer Part No.: |
Standard Pilot |
Product Details
| Cover End Flow @ RPM |
75.0 LB |
| Weight |
Flange Mount |
| Pilot Type |
Right Hand (CW) |
| Pump Series |
3520VQ30A11-1DD20 |
| Displacement Shaft End (cu in/revolution) |
3 |
| Shaft End RPM [Max |
Flange |
| Shaft End Pressure [Max |
5/16 in |
| Manufacturer Part No. |
Standard Pilot |
| Pressure Port Size, Shaft End |
1.25 in |
| Integral Valve Configuration |
Straight w/ Key |
| Mounting Flange |
3520VQ |
| Model No. |
2 1/2 in |
| Minor Diameter [Min |
Buna-N |
| Mounting |
2500 |
| Major Diameter [Min |
N/A |
| Cover End RPM [Max |
SAE C, 2 Bolt |
| Shaft Dia. |
Single Shaft Seal |
| Shaft Key |
N/A |
| Cover End Pressure [Max |
2500 |
| GPM @ 1,800 rpm, Cover End |
2500 |
| Seal Material |
N/A |
| Minor Diameter [Max |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
N/A |
| Relief Valve Setting |
N/A |
| Port Size |
N/A |
| Max. RPM [Max |
N/A |
| Controlled Flow Rate |
N/A |
| Pressure Port Size, Cover End |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Spline Description |
3520VQ30A11-1DD20 |
| Port Orientation - Shaft End |
3000 |
| Displacement Cover End (cu in/revolution) |
3000 |
| Rotation |
16.5 |
| Port Type |
45 |
| Shaft Length |
w/o Integral Valves |
| GPM @ 1,800 rpm, Shaft End |
Outlet 135° CW from Inlet |
| Shaft End Flow @ RPM |
Outlet 90° CW from Inlet |
| Port Orientation - Cover End |
3/4 in Flange |
| Minor Diameter |
1 1/4 in Flange |
| Shaft Seal Type |
2.22 |
| Shaft Type |
5.96 |