3.543 Inch | 90 Millimeter x 8.858 Inch | 225 Millimeter x 2.126 Inch | 54 Millimeter CONSOLIDATED BEARING NJ-418 M RL2 Cylindrical Roller Bearings
100% Authentic. 3.543 Inch | 90 Millimeter x 8.858 Inch | 225 Millimeter x 2.126 Inch | 54 Millimeter 3.543 Inch | 90 Millimeter x 8.858 Inch | 225 Millimeter x 2.126 Inch | 54 Millimeter CONSOLIDATED BEARING NJ-418 M RL2 Cylindrical Roller Bearings Highest Quality. Certified BEARING SUDAMERICANA,S.A. 120 mm D Supplier.
What is NJ-418 M RL2 bearing cross reference？
| Brand Name: |
CONSOLIDATED BEARING |
| Model Number: |
NJ-418 M RL2 |
| Pressure Port Size, Shaft End: |
45.0 LB |
| Shaft Dia.: |
Flange Mount |
| Shaft Seal Type: |
Left Hand (CCW) |
| Model No.: |
2520VQ21A11-1DD20LH |
| Shaft Type: |
2 1/2 |
| Integral Valve Configuration: |
Flange |
| Mounting: |
3/16 in |
| Cover End Flow @ RPM: |
Standard Pilot |
Product Details
| Pressure Port Size, Shaft End |
45.0 LB |
| Shaft Dia. |
Flange Mount |
| Shaft Seal Type |
Left Hand (CCW) |
| Model No. |
2520VQ21A11-1DD20LH |
| Shaft Type |
2 1/2 |
| Integral Valve Configuration |
Flange |
| Mounting |
3/16 in |
| Cover End Flow @ RPM |
Standard Pilot |
| Seal Material |
0.875 in |
| Spline Description |
Straight w/ Key |
| Shaft Key |
2520VQ |
| Shaft End RPM [Max |
1 15/16 in |
| Rotation |
Buna-N |
| Shaft End Flow @ RPM |
2500 |
| Port Orientation - Cover End |
N/A |
| Minor Diameter |
SAE B, 2 Bolt |
| Cover End Pressure [Max |
Single Shaft Seal |
| Pump Series |
N/A |
| Major Diameter [Max |
2700 |
| Weight |
2500 |
| Pressure Port Size, Cover End |
N/A |
| Displacement Cover End (cu in/revolution) |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Cover End RPM [Max |
N/A |
| Mounting Flange |
N/A |
| Port Orientation - Shaft End |
N/A |
| Manufacturer Part No. |
N/A |
| Port Type |
N/A |
| Port Size |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Max. RPM [Max |
2520VQ21A11-1DD20LH |
| Pilot Type |
3000 |
| Minor Diameter [Min |
3000 |
| Shaft End Pressure [Max |
16.5 |
| Controlled Flow Rate |
31.5 |
| GPM @ 1,800 rpm, Shaft End |
w/o Integral Valves |
| Displacement Shaft End (cu in/revolution) |
Outlet 135° CW from Inlet |
| Minor Diameter [Max |
Outlet 90° CW from Inlet |
| Relief Valve Setting |
3/4 in Flange |
| Shaft Length |
1 in Flange |
| Major Diameter [Min |
2.22 |
| GPM @ 1,800 rpm, Cover End |
4.12 |