1.181 Inch | 30 Millimeter x 1.772 Inch | 45 Millimeter x 0.787 Inch | 20 Millimeter CONSOLIDATED BEARING NKI-30/20 P/6 Needle Non Thrust Roller Bearings
Find the discount 1.181 Inch | 30 Millimeter x 1.772 Inch | 45 Millimeter x 0.787 Inch | 20 Millimeter CONSOLIDATED BEARING NKI-30/20 P/6 Needle Non Thrust Roller Bearings online you need . We BEARING SUDAMERICANA,S.A. offer ... If you 1.181 Inch | 30 Millimeter x 1.772 Inch | 45 Millimeter x 0.787 Inch | 20 Millimeter check out our 37.3 mm da max. large 11.2 kN Basic static load rating C0 selection of 1.181 Inch | 30 Millimeter x 1.772 Inch | 45 Millimeter x 0.787 Inch | 20 Millimeter CONSOLIDATED BEARING NKI-30/20 P/6 Needle Non Thrust Roller Bearings once .
What is NKI-30/20 P/6 bearing cross reference？
| Brand Name: |
CONSOLIDATED BEARING |
| Model Number: |
NKI-30/20 P/6 |
| Displacement Cover End (cu in/revolution): |
76.0 LB |
| Controlled Flow Rate: |
Flange Mount |
| Cover End Pressure [Max: |
Left Hand (CCW) |
| Relief Valve Setting: |
3525VQ30A12-1CC20LH |
| GPM @ 1,800 rpm, Shaft End: |
3 |
| Integral Valve Configuration: |
Flange |
| Pressure Port Size, Cover End: |
5/16 in |
| Shaft End Pressure [Max: |
Standard Pilot |
Product Details
| Displacement Cover End (cu in/revolution) |
76.0 LB |
| Controlled Flow Rate |
Flange Mount |
| Cover End Pressure [Max |
Left Hand (CCW) |
| Relief Valve Setting |
3525VQ30A12-1CC20LH |
| GPM @ 1,800 rpm, Shaft End |
3 |
| Integral Valve Configuration |
Flange |
| Pressure Port Size, Cover End |
5/16 in |
| Shaft End Pressure [Max |
Standard Pilot |
| Shaft Seal Type |
1.25 in |
| Pressure Port Size, Shaft End |
Straight w/ Key |
| Port Orientation - Shaft End |
3525VQ |
| Rotation |
2.5 in |
| Port Orientation - Cover End |
Buna-N |
| Manufacturer Part No. |
2500 |
| Minor Diameter [Max |
N/A |
| Model No. |
SAE C, 2 Bolt |
| Shaft Dia. |
Single Shaft Seal |
| Shaft Length |
N/A |
| Pump Series |
2500 |
| Displacement Shaft End (cu in/revolution) |
2500 |
| Minor Diameter [Min |
N/A |
| GPM @ 1,800 rpm, Cover End |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Port Size |
N/A |
| Spline Description |
N/A |
| Shaft End Flow @ RPM |
N/A |
| Mounting Flange |
N/A |
| Port Type |
N/A |
| Shaft End RPM [Max |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Shaft Type |
3525VQ30A12-1CC20LH |
| Minor Diameter |
3000 |
| Major Diameter [Max |
3000 |
| Cover End RPM [Max |
18 |
| Cover End Flow @ RPM |
45 |
| Major Diameter [Min |
w/o Integral Valves |
| Seal Material |
Outlet 45° CW from Inlet |
| Weight |
Outlet Inline w/Inlet |
| Max. RPM [Max |
1 in Flange |
| Mounting |
1 1/4 in Flange |
| Pilot Type |
2.45 |
| Shaft Key |
5.96 |