CONSOLIDATED BEARING SS68/1.5 Single Row Ball Bearings
With over 10170 full-service stores, our 1006 mm D1 1760 kN Fatigue load limit Pu CONSOLIDATED BEARING SS68/1.5 Single Row Ball Bearings inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving BEARING SUDAMERICANA,S.A. time and your hard-earned dollars.
What is SS68/1.5 bearing cross reference？
| Brand Name: |
CONSOLIDATED BEARING |
| Model Number: |
SS68/1.5 |
| Minor Diameter [Max: |
45.0 LB |
| Cover End Pressure [Max: |
Flange Mount |
| Minor Diameter [Min: |
Right Hand (CW) |
| Seal Material: |
2520VQ14A12-11AA20 |
| Port Orientation - Cover End: |
2 1/2 |
| Max. RPM [Max: |
Flange |
| Pressure Port Size, Shaft End: |
N/A |
| Rotation: |
Standard Pilot |
Product Details
| Minor Diameter [Max |
45.0 LB |
| Cover End Pressure [Max |
Flange Mount |
| Minor Diameter [Min |
Right Hand (CW) |
| Seal Material |
2520VQ14A12-11AA20 |
| Port Orientation - Cover End |
2 1/2 |
| Max. RPM [Max |
Flange |
| Pressure Port Size, Shaft End |
N/A |
| Rotation |
Standard Pilot |
| Shaft End Flow @ RPM |
0.875 in |
| Port Type |
13 Tooth Splined |
| Port Orientation - Shaft End |
2520VQ |
| Manufacturer Part No. |
1.375 in |
| Controlled Flow Rate |
Buna-N |
| Mounting |
2700 |
| Shaft Dia. |
0.715 in |
| Pump Series |
SAE B, 2 Bolt |
| Shaft End Pressure [Max |
Single Shaft Seal |
| Shaft Key |
16/32 |
| Relief Valve Setting |
2700 |
| Shaft Length |
2700 |
| Major Diameter [Max |
N/A |
| Mounting Flange |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Model No. |
0.873 in |
| Pressure Port Size, Cover End |
0.872 in |
| Cover End Flow @ RPM |
N/A |
| Shaft Seal Type |
N/A |
| Shaft End RPM [Max |
N/A |
| GPM @ 1,800 rpm, Cover End |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
2520VQ14A12-11AA20 |
| Port Size |
2300 |
| Integral Valve Configuration |
3000 |
| Spline Description |
18 |
| Pilot Type |
21 |
| Cover End RPM [Max |
w/o Integral Valves |
| Displacement Cover End (cu in/revolution) |
Outlet 135° CCW from Inlet |
| Weight |
Outlet Opposite Inlet |
| Shaft Type |
3/4 in Flange |
| Displacement Shaft End (cu in/revolution) |
1 in Flange |
| Major Diameter [Min |
2.41 |
| Minor Diameter |
2.77 |