2 Inch | 50.8 Millimeter x 2.84 Inch | 72.136 Millimeter x 2.25 Inch | 57.15 Millimeter DODGE EP2B-S2-200RE Pillow Block Bearings
2 Inch | 50.8 Millimeter x 2.84 Inch | 72.136 Millimeter x 2.25 Inch | 57.15 Millimeter DODGE EP2B-S2-200RE Pillow Block Bearings Needs BEARING SUDAMERICANA,S.A. Analysis , DODGE Bearing 2 Inch | 50.8 Millimeter x 2.84 Inch | 72.136 Millimeter x 2.25 Inch | 57.15 Millimeter Manufacturing 0.0 Inventory Service . Get Your Free.
What is EP2B-S2-200RE bearing cross reference？
| Brand Name: |
DODGE |
| Model Number: |
EP2B-S2-200RE |
| Port Orientation - Shaft End: |
45.0 LB |
| Major Diameter [Max: |
Flange Mount |
| GPM @ 1,800 rpm, Cover End: |
Right Hand (CW) |
| Shaft End Pressure [Max: |
2520VQ14A14-1AA20 |
| Shaft Length: |
2 1/2 |
| Controlled Flow Rate: |
Flange |
| Shaft End RPM [Max: |
3/16 in |
| Manufacturer Part No.: |
Standard Pilot |
Product Details
| Port Orientation - Shaft End |
45.0 LB |
| Major Diameter [Max |
Flange Mount |
| GPM @ 1,800 rpm, Cover End |
Right Hand (CW) |
| Shaft End Pressure [Max |
2520VQ14A14-1AA20 |
| Shaft Length |
2 1/2 |
| Controlled Flow Rate |
Flange |
| Shaft End RPM [Max |
3/16 in |
| Manufacturer Part No. |
Standard Pilot |
| Mounting Flange |
0.875 in |
| Relief Valve Setting |
Straight w/ Key |
| Port Type |
2520VQ |
| Pump Series |
1.9375 in |
| Max. RPM [Max |
Buna-N |
| Pilot Type |
2700 |
| Cover End RPM [Max |
N/A |
| Integral Valve Configuration |
SAE B, 2 Bolt |
| Shaft End Flow @ RPM |
Single Shaft Seal |
| Minor Diameter [Min |
N/A |
| Major Diameter [Min |
2700 |
| Minor Diameter |
2700 |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Mounting |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) |
N/A |
| Minor Diameter [Max |
N/A |
| Weight |
N/A |
| Cover End Flow @ RPM |
N/A |
| Shaft Key |
N/A |
| Displacement Shaft End (cu in/revolution) |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Port Size |
2520VQ14A14-1AA20 |
| Shaft Type |
2000 |
| Shaft Seal Type |
3000 |
| Pressure Port Size, Shaft End |
21 |
| Pressure Port Size, Cover End |
21 |
| Rotation |
w/o Integral Valves |
| Cover End Pressure [Max |
Outlet 135° CCW from Inlet |
| Spline Description |
Outlet Opposite Inlet |
| Shaft Dia. |
3/4 in Flange |
| Model No. |
1 in Flange |
| Port Orientation - Cover End |
2.8 |
| Seal Material |
2.77 |