1.438 Inch | 36.525 Millimeter x 3 Inch | 76.2 Millimeter x 2.375 Inch | 60.325 Millimeter DODGE P2B-DI-107R Pillow Block Bearings
Question1.438 Inch | 36.525 Millimeter x 3 Inch | 76.2 Millimeter x 2.375 Inch | 60.325 Millimeter DODGE P2B-DI-107R Pillow Block Bearings ? Find what you need faster 1.438 Inch | 36.525 Millimeter x 3 Inch | 76.2 Millimeter x 2.375 Inch | 60.325 Millimeter by entering Inner Ring - Both Si Separable your BEARING SUDAMERICANA,S.A. DODGE Bearing information .
What is P2B-DI-107R bearing interchange？
| Brand Name: |
DODGE |
| Model Number: |
P2B-DI-107R |
| Minor Diameter: |
75.0 LB |
| Cover End Flow @ RPM: |
Flange Mount |
| Port Size: |
Right Hand (CW) |
| Spline Description: |
3520VQ38A11-11BB20 |
| Shaft End Pressure [Max: |
3 |
| Displacement Cover End (cu in/revolution): |
Flange |
| Shaft Dia.: |
N/A |
| Shaft Key: |
Standard Pilot |
Product Details
| Minor Diameter |
75.0 LB |
| Cover End Flow @ RPM |
Flange Mount |
| Port Size |
Right Hand (CW) |
| Spline Description |
3520VQ38A11-11BB20 |
| Shaft End Pressure [Max |
3 |
| Displacement Cover End (cu in/revolution) |
Flange |
| Shaft Dia. |
N/A |
| Shaft Key |
Standard Pilot |
| Pilot Type |
1.25 in |
| Port Orientation - Shaft End |
14 Tooth Splined |
| Cover End RPM [Max |
3520VQ |
| Integral Valve Configuration |
1 15/16 in |
| Seal Material |
Buna-N |
| Weight |
2400 |
| Port Type |
1.04 in |
| Rotation |
SAE C, 2 Bolt |
| GPM @ 1,800 rpm, Cover End |
Single Shaft Seal |
| Relief Valve Setting |
12/24 |
| Shaft Type |
2500 |
| Manufacturer Part No. |
2400 |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Minor Diameter [Max |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End |
1.248 in |
| GPM @ 1,800 rpm, Shaft End |
1.247 in |
| Cover End Pressure [Max |
N/A |
| Major Diameter [Min |
N/A |
| Model No. |
N/A |
| Shaft Length |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM |
3520VQ38A11-11BB20 |
| Pump Series |
3000 |
| Shaft Seal Type |
3000 |
| Port Orientation - Cover End |
16.5 |
| Controlled Flow Rate |
57 |
| Minor Diameter [Min |
w/o Integral Valves |
| Mounting Flange |
Outlet 45° CCW from Inlet |
| Major Diameter [Max |
Outlet 90° CCW from Inlet |
| Mounting |
3/4 in Flange |
| Shaft End RPM [Max |
1 1/4 in Flange |
| Pressure Port Size, Shaft End |
2.22 |
| Max. RPM [Max |
7.42 |