1 Inch | 25.4 Millimeter x 1.188 Inch | 30.17 Millimeter x 1.313 Inch | 33.35 Millimeter DODGE P2B-SCB-100 Pillow Block Bearings
Question1 Inch | 25.4 Millimeter x 1.188 Inch | 30.17 Millimeter x 1.313 Inch | 33.35 Millimeter DODGE P2B-SCB-100 Pillow Block Bearings ? Find what you need faster by Yes Retainer entering BEARING SUDAMERICANA,S.A. your 1 Inch | 25.4 Millimeter x 1.188 Inch | 30.17 Millimeter x 1.313 Inch | 33.35 Millimeter DODGE Bearing information .
What is P2B-SCB-100 bearing interchange？
| Brand Name: |
DODGE |
| Model Number: |
P2B-SCB-100 |
| Major Diameter [Max: |
45.0 LB |
| Shaft Type: |
Flange Mount |
| Pump Series: |
Right Hand (CW) |
| Shaft Length: |
2520VQ21A5-1DD20 |
| Spline Description: |
2.5 |
| Port Orientation - Shaft End: |
Flange |
| Rotation: |
3/16 in |
| Minor Diameter [Max: |
Standard Pilot |
Product Details
| Major Diameter [Max |
45.0 LB |
| Shaft Type |
Flange Mount |
| Pump Series |
Right Hand (CW) |
| Shaft Length |
2520VQ21A5-1DD20 |
| Spline Description |
2.5 |
| Port Orientation - Shaft End |
Flange |
| Rotation |
3/16 in |
| Minor Diameter [Max |
Standard Pilot |
| Port Type |
0.875 in |
| Weight |
Straight w/ Key |
| Displacement Cover End (cu in/revolution) |
2520VQ |
| GPM @ 1,800 rpm, Cover End |
1 15/16 in |
| Major Diameter [Min |
Double |
| Seal Material |
Buna-N |
| Integral Valve Configuration |
2500 |
| Shaft End Flow @ RPM |
N/A |
| Manufacturer Part No. |
SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Shaft End |
Single Shaft Seal |
| Port Size |
N/A |
| Controlled Flow Rate |
2700 |
| Cover End Pressure [Max |
2500 |
| Mounting |
N/A |
| Pilot Type |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End |
N/A |
| Shaft End Pressure [Max |
N/A |
| Max. RPM [Max |
N/A |
| Port Orientation - Cover End |
N/A |
| Pressure Port Size, Cover End |
N/A |
| Displacement Shaft End (cu in/revolution) |
4.1 |
| Cover End Flow @ RPM |
2520VQ21A5-1DD20 |
| Shaft Dia. |
3000 |
| Model No. |
3000 |
| Cover End RPM [Max |
7.5 |
| Shaft Key |
31.5 |
| Relief Valve Setting |
w/o Integral Valves |
| Minor Diameter [Min |
Outlet 135° CW from Inlet |
| Minor Diameter |
Outlet 90° CW from Inlet |
| Mounting Flange |
3/4 in Flange |
| Shaft Seal Type |
1 in Flange |
| Shaft End RPM [Max |
1.1 |