2.25 Inch | 57.15 Millimeter x 3.42 Inch | 86.868 Millimeter x 2.75 Inch | 69.85 Millimeter DODGE SEP2B-IP-204RE Pillow Block Bearings
Question2.25 Inch | 57.15 Millimeter x 3.42 Inch | 86.868 Millimeter x 2.75 Inch | 69.85 Millimeter DODGE SEP2B-IP-204RE Pillow Block Bearings BEARING SUDAMERICANA,S.A. ? Find Cylindrical Roller B Category what 31171547 UNSPSC you 2.25 Inch | 57.15 Millimeter x 3.42 Inch | 86.868 Millimeter x 2.75 Inch | 69.85 Millimeter need faster by entering your DODGE Bearing information .
What is SEP2B-IP-204RE bearing cross reference?
Brand Name: |
DODGE |
Model Number: |
SEP2B-IP-204RE |
Pilot Type: |
76.0 LB |
Relief Valve Setting: |
Flange Mount |
Cover End Pressure [Max: |
Right Hand (CW) |
Mounting Flange: |
3525VQ38A12-1AA20 |
Shaft End Flow @ RPM: |
3 |
Weight: |
Flange |
Major Diameter [Max: |
5/16 in |
Model No.: |
Standard Pilot |
Product Details
Pilot Type |
76.0 LB |
Relief Valve Setting |
Flange Mount |
Cover End Pressure [Max |
Right Hand (CW) |
Mounting Flange |
3525VQ38A12-1AA20 |
Shaft End Flow @ RPM |
3 |
Weight |
Flange |
Major Diameter [Max |
5/16 in |
Model No. |
Standard Pilot |
Shaft Type |
1.25 in |
GPM @ 1,800 rpm, Shaft End |
Straight w/ Key |
Minor Diameter [Min |
3525VQ |
GPM @ 1,800 rpm, Cover End |
2 1/2 in |
Minor Diameter |
Double |
Port Orientation - Shaft End |
Buna-N |
Controlled Flow Rate |
2400 |
Integral Valve Configuration |
N/A |
Seal Material |
SAE C, 2 Bolt |
Shaft End Pressure [Max |
Single Shaft Seal |
Spline Description |
N/A |
Shaft Key |
2500 |
Shaft Dia. |
2400 |
Displacement Cover End (cu in/revolution) |
N/A |
Major Diameter [Min |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Cover End Flow @ RPM |
N/A |
Pressure Port Size, Shaft End |
N/A |
Pump Series |
N/A |
Pressure Port Size, Cover End |
N/A |
Shaft Length |
N/A |
Port Orientation - Cover End |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Minor Diameter [Max |
3525VQ38A12-1AA20 |
Manufacturer Part No. |
3000 |
Cover End RPM [Max |
3000 |
Shaft Seal Type |
18 |
Displacement Shaft End (cu in/revolution) |
7.4 |
Port Size |
w/o Integral Valves |
Mounting |
Outlet 135° CCW from Inlet |
Max. RPM [Max |
Outlet Opposite Inlet |
Shaft End RPM [Max |
1 in Flange |
Port Type |
1 1/4 in Flange |
Rotation |
2.5 |