LINK BELT CSEB22419E6E7K4 Cartridge Unit Bearings
The online LINK BELT CSEB22419E6E7K4 Cartridge Unit Bearings parts store BEARING SUDAMERICANA,S.A. gives you 80MM Bore; 170MM Out Long Description immediate access to No Maximum Capacity / Filling Slot a selection of more than 1.4 million new, used, remanufactured.
What is CSEB22419E6E7K4 bearing cross reference?
Brand Name: |
LINK BELT |
Model Number: |
CSEB22419E6E7K4 |
Major Diameter [Max: |
45.0 LB |
Shaft End Flow @ RPM: |
Flange Mount |
Minor Diameter [Max: |
Left Hand (CCW) |
Manufacturer Part No.: |
2520VQ17A11-11CB20-LH |
Controlled Flow Rate: |
2 1/2 |
Weight: |
Flange |
Pilot Type: |
N/A |
Shaft Seal Type: |
Standard Pilot |
Product Details
Major Diameter [Max |
45.0 LB |
Shaft End Flow @ RPM |
Flange Mount |
Minor Diameter [Max |
Left Hand (CCW) |
Manufacturer Part No. |
2520VQ17A11-11CB20-LH |
Controlled Flow Rate |
2 1/2 |
Weight |
Flange |
Pilot Type |
N/A |
Shaft Seal Type |
Standard Pilot |
GPM @ 1,800 rpm, Cover End |
0.875 in |
Spline Description |
13 Tooth Splined |
Cover End RPM [Max |
2520VQ |
Shaft End Pressure [Max |
1 3/8 in |
Relief Valve Setting |
Buna-N |
Displacement Cover End (cu in/revolution) |
2500 |
Pressure Port Size, Cover End |
0.715 in |
Major Diameter [Min |
SAE B, 2 Bolt |
Cover End Pressure [Max |
Single Shaft Seal |
Rotation |
16/32 |
Max. RPM [Max |
2700 |
Minor Diameter [Min |
2500 |
GPM @ 1,800 rpm, Shaft End |
N/A |
Shaft End RPM [Max |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Integral Valve Configuration |
0.873 in |
Shaft Length |
0.872 in |
Seal Material |
N/A |
Shaft Type |
N/A |
Shaft Dia. |
N/A |
Minor Diameter |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Displacement Shaft End (cu in/revolution) |
2520VQ17A11-11CB20-LH |
Model No. |
3000 |
Mounting Flange |
3000 |
Mounting |
16.5 |
Port Orientation - Cover End |
25.5 |
Shaft Key |
w/o Integral Valves |
Pump Series |
Outlet 45° CCW from Inlet |
Port Size |
Outlet Inline w/Inlet |
Port Type |
3/4 in Flange |
Cover End Flow @ RPM |
1 in Flange |
Port Orientation - Shaft End |
2.22 |
Pressure Port Size, Shaft End |
3.37 |