2.188 Inch | 55.575 Millimeter x 2.25 Inch | 57.15 Millimeter x 2.5 Inch | 63.5 Millimeter LINK BELT P3U235H Pillow Block Bearings
Question2.188 Inch | 55.575 Millimeter x 2.25 Inch | 57.15 Millimeter x 2.5 Inch | 63.5 Millimeter LINK BELT P3U235H Pillow Block Bearings BEARING SUDAMERICANA,S.A. ? Find 2.188 Inch | 55.575 Millimeter x 2.25 Inch | 57.15 Millimeter x 2.5 Inch | 63.5 Millimeter what you need faster NTN Manufacturer Name by entering your LINK BELT Bearing information .
What is P3U235H bearing interchange？
| Brand Name: |
LINK BELT |
| Model Number: |
P3U235H |
| Weight: |
76.0 LB |
| Model No.: |
Flange Mount |
| Port Type: |
Left Hand (CCW) |
| Displacement Shaft End (cu in/revolution): |
7.4 |
| Seal Material: |
3 |
| Mounting: |
Flange |
| Integral Valve Configuration: |
N/A |
| Relief Valve Setting: |
Standard Pilot |
Product Details
| Weight |
76.0 LB |
| Model No. |
Flange Mount |
| Port Type |
Left Hand (CCW) |
| Displacement Shaft End (cu in/revolution) |
7.4 |
| Seal Material |
3 |
| Mounting |
Flange |
| Integral Valve Configuration |
N/A |
| Relief Valve Setting |
Standard Pilot |
| Minor Diameter [Min |
1.25 in |
| Shaft Seal Type |
14 Tooth Splined |
| GPM @ 1,800 rpm, Cover End |
3525VQ |
| Pressure Port Size, Cover End |
1.9375 in |
| Port Orientation - Shaft End |
Double |
| Cover End RPM [Max |
Buna-N |
| Shaft Dia. |
2400 |
| Shaft End RPM [Max |
1.04 in |
| Shaft Length |
SAE C, 2 Bolt |
| GPM @ 1,800 rpm, Shaft End |
Single Shaft Seal |
| Shaft End Flow @ RPM |
12/24 |
| Port Orientation - Cover End |
2500 |
| Spline Description |
2400 |
| Shaft End Pressure [Max |
N/A |
| Cover End Flow @ RPM |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Minor Diameter [Max |
1.248 in |
| Rotation |
1.247 in |
| Max. RPM [Max |
N/A |
| Minor Diameter |
N/A |
| Major Diameter [Min |
N/A |
| Mounting Flange |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) |
3525VQ38A21-11AA20-LH |
| Shaft Key |
3000 |
| Port Size |
3000 |
| Cover End Pressure [Max |
31.5 |
| Shaft Type |
57 |
| Pilot Type |
w/o Integral Valves |
| Major Diameter [Max |
Outlet 135° CCW from Inlet |
| Pressure Port Size, Shaft End |
Outlet Opposite Inlet |
| Controlled Flow Rate |
1 in Flange |
| Pump Series |
1 1/4 in Flange |
| Manufacturer Part No. |
4.1 |