New Aftermarket PC225-7 Diesel Injection Fuel Feed Pump
| Minor Diameter [Max: |
118.0 LB |
| Controlled Flow Rate: |
Flange Mount |
| Minor Diameter: |
Right Hand (CW) |
| Model No.: |
4535VQ60A25-1DD20 |
| Port Orientation - Cover End: |
4 |
| Shaft Type: |
Flange |
| Port Type: |
5/16 in |
| Spline Description: |
Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter [Max |
118.0 LB |
| Controlled Flow Rate |
Flange Mount |
| Minor Diameter |
Right Hand (CW) |
| Model No. |
4535VQ60A25-1DD20 |
| Port Orientation - Cover End |
4 |
| Shaft Type |
Flange |
| Port Type |
5/16 in |
| Spline Description |
Standard Pilot |
| Mounting Flange |
1.25 in |
| Pressure Port Size, Cover End |
Straight w/ Key |
| Major Diameter [Min |
4535VQ |
| Seal Material |
1 15/16 in |
| Shaft Seal Type |
Buna-N |
| Displacement Cover End (cu in/revolution) |
2200 |
| Minor Diameter [Min |
N/A |
| Cover End Pressure [Max |
SAE C, 2 Bolt |
| Cover End Flow @ RPM |
Single Shaft Seal |
| Pump Series |
N/A |
| GPM @ 1,800 rpm, Shaft End |
2200 |
| Manufacturer Part No. |
2200 |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Relief Valve Setting |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Max. RPM [Max |
N/A |
| Shaft End RPM [Max |
N/A |
| Port Size |
N/A |
| Port Orientation - Shaft End |
N/A |
| Cover End RPM [Max |
N/A |
| Rotation |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Shaft End Pressure [Max |
4535VQ60A25-1DD20 |
| GPM @ 1,800 rpm, Cover End |
3000 |
| Shaft Dia. |
2500 |
| Shaft End Flow @ RPM |
37.5 |
| Shaft Length |
90 |
| Shaft Key |
w/o Integral Valves |
| Mounting |
Outlet 90° CW from Inlet |
| Major Diameter [Max |
Outlet 90° CW from Inlet |
| Pilot Type |
1 1/4 in Flange |
| Pressure Port Size, Shaft End |
1 1/2 in Flange |
| Weight |
4.98 |
| Integral Valve Configuration |
11.8 |