6127-61-1008 Japan bulldozer D355C1 engine part SA6D155 water pump
| Port Orientation - Cover End: |
101.0 LB |
| Port Orientation - Shaft End: |
Flange Mount |
| Seal Material: |
Left Hand (CCW) |
| Controlled Flow Rate: |
4525V60A17-1AC22L |
| Displacement Shaft End (cu in/revolution): |
3 1/2 |
| Minor Diameter [Min: |
Flange |
| Shaft End Pressure [Max: |
5/16 in |
| Relief Valve Setting: |
Standard Pilot |
| PDF |
|
Product Details
| Port Orientation - Cover End |
101.0 LB |
| Port Orientation - Shaft End |
Flange Mount |
| Seal Material |
Left Hand (CCW) |
| Controlled Flow Rate |
4525V60A17-1AC22L |
| Displacement Shaft End (cu in/revolution) |
3 1/2 |
| Minor Diameter [Min |
Flange |
| Shaft End Pressure [Max |
5/16 in |
| Relief Valve Setting |
Standard Pilot |
| Rotation |
1.25 in |
| Shaft Key |
Straight w/ Key |
| Pump Series |
4525V |
| Manufacturer Part No. |
2.4375 in |
| Mounting Flange |
Buna-N |
| Port Size |
1800 |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Shaft End Flow @ RPM |
SAE C, 2 Bolt |
| Shaft Type |
Single Shaft Seal |
| Major Diameter [Min |
N/A |
| Cover End RPM [Max |
1800 |
| Major Diameter [Max |
1800 |
| Spline Description |
N/A |
| Port Type |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Shaft Length |
N/A |
| Minor Diameter |
N/A |
| Integral Valve Configuration |
N/A |
| Pressure Port Size, Cover End |
N/A |
| Cover End Flow @ RPM |
N/A |
| Shaft End RPM [Max |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Weight |
4525V60A17-1AC22L |
| Shaft Seal Type |
2500 |
| Cover End Pressure [Max |
2500 |
| GPM @ 1,800 rpm, Cover End |
25.5 |
| Displacement Cover End (cu in/revolution) |
90 |
| Model No. |
N/A |
| Mounting |
Outlet 45° CW from Inlet |
| Pilot Type |
Outlet Opposite Inlet |
| Max. RPM [Max |
1 in Code 61 |
| Pressure Port Size, Shaft End |
1 1/2 in Code 61 |
| Shaft Dia. |
3.4 |
| Minor Diameter [Max |
11.8 |