6204-61-1301 Excavator Engine 4D95S & S4D95L Water Pump ASS'Y
| Minor Diameter [Max: |
45.0 LB |
| Relief Valve Setting: |
Flange Mount |
| Mounting Flange: |
Left Hand (CCW) |
| Manufacturer Part No.: |
2520VQ21A11-11DD20-LH |
| Displacement Shaft End (cu in/revolution): |
2 1/2 |
| Controlled Flow Rate: |
Flange |
| Shaft Key: |
N/A |
| Major Diameter [Max: |
Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter [Max |
45.0 LB |
| Relief Valve Setting |
Flange Mount |
| Mounting Flange |
Left Hand (CCW) |
| Manufacturer Part No. |
2520VQ21A11-11DD20-LH |
| Displacement Shaft End (cu in/revolution) |
2 1/2 |
| Controlled Flow Rate |
Flange |
| Shaft Key |
N/A |
| Major Diameter [Max |
Standard Pilot |
| Port Type |
0.875 in |
| Minor Diameter [Min |
13 Tooth Splined |
| Shaft Dia. |
2520VQ |
| Shaft End Flow @ RPM |
1.375 in |
| Spline Description |
Buna-N |
| Integral Valve Configuration |
2500 |
| Pump Series |
0.715 in |
| Pressure Port Size, Cover End |
SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Shaft End |
Single Shaft Seal |
| Seal Material |
16/32 |
| Max. RPM [Max |
2700 |
| Minor Diameter |
2500 |
| Shaft End Pressure [Max |
N/A |
| Cover End Pressure [Max |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) |
0.873 in |
| Major Diameter [Min |
0.872 in |
| Pressure Port Size, Shaft End |
N/A |
| Shaft Length |
N/A |
| Weight |
N/A |
| Port Size |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Rotation |
2520VQ21A11-11DD20-LH |
| Cover End RPM [Max |
3000 |
| Cover End Flow @ RPM |
3000 |
| Mounting |
16.5 |
| GPM @ 1,800 rpm, Cover End |
31.5 |
| Port Orientation - Cover End |
w/o Integral Valves |
| Shaft Type |
Outlet 135° CW from Inlet |
| Shaft Seal Type |
Outlet 90° CW from Inlet |
| Model No. |
3/4 in Flange |
| Shaft End RPM [Max |
1 in Flange |
| Port Orientation - Shaft End |
2.22 |
| Pilot Type |
4.12 |