Remanufactured High Speed Fixed Displacement Motor 5433 for Eaton
| Model No.: |
75.0 LB |
| Max. RPM [Max: |
Flange Mount |
| Displacement Cover End (cu in/revolution): |
Right Hand (CW) |
| Manufacturer Part No.: |
3520V35A8-11AA22R |
| Pump Series: |
3 |
| Minor Diameter [Max: |
Flange |
| Mounting: |
N/A |
| Shaft End Flow @ RPM: |
Standard Pilot |
| PDF |
|
Product Details
| Model No. |
75.0 LB |
| Max. RPM [Max |
Flange Mount |
| Displacement Cover End (cu in/revolution) |
Right Hand (CW) |
| Manufacturer Part No. |
3520V35A8-11AA22R |
| Pump Series |
3 |
| Minor Diameter [Max |
Flange |
| Mounting |
N/A |
| Shaft End Flow @ RPM |
Standard Pilot |
| Weight |
1.375 in |
| Pilot Type |
14 Tooth Splined |
| Cover End RPM [Max |
3520V |
| Relief Valve Setting |
2 5/16 in |
| Shaft Type |
Buna-N |
| Shaft Seal Type |
1800 |
| Cover End Pressure [Max |
1.055 in |
| Major Diameter [Min |
SAE C, 2 Bolt |
| Mounting Flange |
Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End |
12/24 |
| Port Size |
1800 |
| Displacement Shaft End (cu in/revolution) |
1800 |
| Pressure Port Size, Shaft End |
N/A |
| Shaft Key |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
1.25 in |
| Seal Material |
1.247 in |
| Shaft End RPM [Max |
1.06 in |
| Minor Diameter |
1.05 in |
| Major Diameter [Max |
N/A |
| Shaft Dia. |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Shaft End Pressure [Max |
3520V35A8-11AA22R |
| Integral Valve Configuration |
3000 |
| Rotation |
2500 |
| Spline Description |
12 |
| Port Orientation - Shaft End |
52.5 |
| Cover End Flow @ RPM |
N/A |
| Minor Diameter [Min |
Outlet 135° CCW from Inlet |
| Shaft Length |
Outlet Opposite Inlet |
| Controlled Flow Rate |
3/4 in Code 61 |
| Pressure Port Size, Cover End |
1 1/4 in Code 61 |
| Port Orientation - Cover End |
1.7 |
| Port Type |
6.8 |