9T5199 Cast Aluminum Hydraulic Gear Pump Group for 980C, 980F
| Pressure Port Size, Shaft End: |
18.0 LB |
| Major Diameter [Min: |
Flange Mount |
| Controlled Flow Rate: |
Right Hand (CW) |
| Pump Series: |
1 1/4 |
| Rotation: |
NPT |
| Minor Diameter: |
N/A |
| Shaft End Flow @ RPM: |
11 |
| Shaft End RPM [Max: |
7 gpm @ 1200 rpm |
| PDF |
|
Product Details
| Pressure Port Size, Shaft End |
18.0 LB |
| Major Diameter [Min |
Flange Mount |
| Controlled Flow Rate |
Right Hand (CW) |
| Pump Series |
1 1/4 |
| Rotation |
NPT |
| Minor Diameter |
N/A |
| Shaft End Flow @ RPM |
11 |
| Shaft End RPM [Max |
7 gpm @ 1200 rpm |
| Max. RPM [Max |
0.73 in |
| GPM @ 1,800 rpm, Shaft End |
11 Tooth Splined |
| Port Orientation - Shaft End |
11 / 1800 |
| Spline Description |
V20 |
| Pilot Type |
1.25 in |
| Weight |
3/4 in NPT |
| Major Diameter [Max |
Buna-N |
| Seal Material |
3000 |
| Mounting |
2500 psi |
| Minor Diameter [Min |
10 1/2 |
| Shaft Dia. |
P |
| Relief Valve Setting |
SAE A, 2 Bolt |
| Model No. |
P |
| Shaft Key |
1 |
| Displacement Shaft End (cu in/revolution) |
Inline w/Inlet |
| Port Type |
1.39 |
| Integral Valve Configuration |
w/o Integral Valves |
| Shaft End Pressure [Max |
38C |