HGP333A HGP-333A Gear Type 3 Stage Hydraulic Pump
| Max. RPM [Max: |
45.0 LB |
| Pressure Port Size, Shaft End: |
Flange Mount |
| Shaft End Pressure [Max: |
Right Hand (CW) |
| Port Type: |
2520V21A11-1CB22R |
| Shaft Length: |
2 1/2 |
| Controlled Flow Rate: |
Flange |
| Shaft Dia.: |
1/4 in |
| Displacement Shaft End (cu in/revolution): |
Standard Pilot |
| PDF |
|
Product Details
| Max. RPM [Max |
45.0 LB |
| Pressure Port Size, Shaft End |
Flange Mount |
| Shaft End Pressure [Max |
Right Hand (CW) |
| Port Type |
2520V21A11-1CB22R |
| Shaft Length |
2 1/2 |
| Controlled Flow Rate |
Flange |
| Shaft Dia. |
1/4 in |
| Displacement Shaft End (cu in/revolution) |
Standard Pilot |
| Shaft Type |
0.875 in |
| Minor Diameter [Max |
Straight w/ Key |
| Cover End Pressure [Max |
2520V |
| Cover End RPM [Max |
2.32 in |
| Pump Series |
Buna-N |
| Relief Valve Setting |
1800 |
| Shaft Seal Type |
N/A |
| Minor Diameter [Min |
SAE B, 2 Bolt |
| Manufacturer Part No. |
Single Shaft Seal |
| Displacement Cover End (cu in/revolution) |
N/A |
| Integral Valve Configuration |
1800 |
| Cover End Flow @ RPM |
1800 |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Rotation |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Mounting Flange |
N/A |
| Major Diameter [Max |
N/A |
| Shaft Key |
N/A |
| Shaft End RPM [Max |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Port Size |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Weight |
2520V21A11-1CB22R |
| Minor Diameter |
3000 |
| Port Orientation - Shaft End |
2500 |
| Port Orientation - Cover End |
16.5 |
| Spline Description |
31.5 |
| Model No. |
N/A |
| Mounting |
Outlet 45° CCW from Inlet |
| Major Diameter [Min |
Outlet Inline w/Inlet |
| Shaft End Flow @ RPM |
3/4 in Code 61 |
| Seal Material |
1 in Code 61 |
| Pressure Port Size, Cover End |
2.2 |
| Pilot Type |
4.1 |