3G7658 4T3196 6J7630 7J0576 7J0577 7J0578 Hydraulic Vane Pump Cartridge Kit 20VQ14 used Excavator CAT Pump
| Shaft End Flow @ RPM: |
45.0 LB |
| Rotation: |
Flange Mount |
| Manufacturer Part No.: |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution): |
2.8 |
| Pilot Type: |
2.5 |
| Pressure Port Size, Shaft End: |
Flange |
| Pump Series: |
N/A |
| Controlled Flow Rate: |
Standard Pilot |
| PDF |
|
Product Details
| Shaft End Flow @ RPM |
45.0 LB |
| Rotation |
Flange Mount |
| Manufacturer Part No. |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution) |
2.8 |
| Pilot Type |
2.5 |
| Pressure Port Size, Shaft End |
Flange |
| Pump Series |
N/A |
| Controlled Flow Rate |
Standard Pilot |
| Shaft End Pressure [Max |
1.09 in |
| Port Size |
13 Tooth Splined |
| Minor Diameter [Max |
2520V |
| Minor Diameter |
1.75 in |
| Spline Description |
Double |
| Relief Valve Setting |
Buna-N |
| Cover End Pressure [Max |
1800 |
| Model No. |
0.729 in |
| Cover End Flow @ RPM |
SAE B, 2 Bolt |
| Mounting Flange |
Single Shaft Seal |
| Major Diameter [Min |
16/32 |
| GPM @ 1,800 rpm, Shaft End |
1800 |
| Cover End RPM [Max |
1800 |
| Weight |
N/A |
| Displacement Cover End (cu in/revolution) |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
0.873 in |
| Shaft Key |
0.872 in |
| GPM @ 1,800 rpm, Cover End |
0.734 in |
| Shaft Dia. |
0.723 in |
| Seal Material |
N/A |
| Max. RPM [Max |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Shaft Length |
2520V14A8-11BB22R |
| Shaft Type |
3000 |
| Major Diameter [Max |
2500 |
| Port Orientation - Cover End |
12 |
| Pressure Port Size, Cover End |
21 |
| Port Type |
N/A |
| Minor Diameter [Min |
Outlet 45° CCW from Inlet |
| Shaft Seal Type |
Outlet 90° CCW from Inlet |
| Mounting |
3/4 in Code 61 |
| Shaft End RPM [Max |
1 in Code 61 |
| Integral Valve Configuration |
1.7 |