CAT Transmission Pump 1P4231 For Caterpillar Hydraulic Gear Oil Pump
| Shaft Type: |
75.0 LB |
| Shaft Length: |
Flange Mount |
| Major Diameter [Max: |
Right Hand (CW) |
| Weight: |
3520VQ30E11-11CC20 |
| Displacement Shaft End (cu in/revolution): |
3 |
| Shaft End RPM [Max: |
Flange |
| Rotation: |
N/A |
| Minor Diameter [Min: |
Standard Pilot |
| PDF |
|
Product Details
| Shaft Type |
75.0 LB |
| Shaft Length |
Flange Mount |
| Major Diameter [Max |
Right Hand (CW) |
| Weight |
3520VQ30E11-11CC20 |
| Displacement Shaft End (cu in/revolution) |
3 |
| Shaft End RPM [Max |
Flange |
| Rotation |
N/A |
| Minor Diameter [Min |
Standard Pilot |
| Minor Diameter |
1.25 in |
| Seal Material |
14 Tooth Splined |
| Shaft Dia. |
3520VQ |
| Cover End Flow @ RPM |
1 15/16 in |
| Port Type |
Buna-N |
| Spline Description |
2500 |
| Port Size |
1.04 in |
| GPM @ 1,800 rpm, Shaft End |
SAE C, 2 Bolt |
| Integral Valve Configuration |
Single Shaft Seal |
| Mounting |
12/24 |
| Manufacturer Part No. |
2500 |
| Pressure Port Size, Cover End |
2500 |
| Pilot Type |
N/A |
| Controlled Flow Rate |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Cover End RPM [Max |
1.248 in |
| Max. RPM [Max |
1.247 in |
| Major Diameter [Min |
N/A |
| Pressure Port Size, Shaft End |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Cover End Pressure [Max |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Shaft End Pressure [Max |
3520VQ30E11-11CC20 |
| Relief Valve Setting |
3000 |
| Minor Diameter [Max |
3000 |
| Mounting Flange |
16.5 |
| Displacement Cover End (cu in/revolution) |
45 |
| Shaft Seal Type |
w/o Integral Valves |
| Shaft End Flow @ RPM |
Outlet 45° CW from Inlet |
| Port Orientation - Cover End |
Outlet Inline w/Inlet |
| Pump Series |
1 1/16 in SAE O-Ring |
| Shaft Key |
1 1/4 in Flange |
| Model No. |
2.22 |
| Port Orientation - Shaft End |
5.96 |