Charging Pump PC200-6 PC300-6 Excavator Pilot Pump
| Shaft End RPM [Max: |
45.0 LB |
| Pressure Port Size, Shaft End: |
Flange Mount |
| Integral Valve Configuration: |
Left Hand (CCW) |
| Cover End Pressure [Max: |
2520VQ21A8-11BC20L |
| Seal Material: |
2.5 |
| Shaft Length: |
Flange |
| Max. RPM [Max: |
N/A |
| Displacement Shaft End (cu in/revolution): |
4.1 |
| PDF |
|
Product Details
| Shaft End RPM [Max |
45.0 LB |
| Pressure Port Size, Shaft End |
Flange Mount |
| Integral Valve Configuration |
Left Hand (CCW) |
| Cover End Pressure [Max |
2520VQ21A8-11BC20L |
| Seal Material |
2.5 |
| Shaft Length |
Flange |
| Max. RPM [Max |
N/A |
| Displacement Shaft End (cu in/revolution) |
4.1 |
| Port Type |
0.875 in |
| Shaft Type |
13 Tooth Splined |
| Shaft Dia. |
2520VQ |
| Minor Diameter [Max |
1 3/8 in |
| Displacement Cover End (cu in/revolution) |
Double |
| Mounting |
Buna-N |
| Port Orientation - Cover End |
2500 |
| Minor Diameter [Min |
0.715 in |
| Relief Valve Setting |
SAE B, 2 Bolt |
| Mounting Flange |
Single Shaft Seal |
| Major Diameter [Min |
16/32 |
| GPM @ 1,800 rpm, Cover End |
2700 |
| Shaft End Pressure [Max |
2500 |
| Port Orientation - Shaft End |
N/A |
| Port Size |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End |
0.873 in |
| Cover End RPM [Max |
0.872 in |
| Manufacturer Part No. |
N/A |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Shaft Seal Type |
N/A |
| Spline Description |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
2520VQ21A8-11BC20L |
| Shaft End Flow @ RPM |
3000 |
| Shaft Key |
3000 |
| Minor Diameter |
12 |
| Controlled Flow Rate |
31.5 |
| Cover End Flow @ RPM |
w/o Integral Valves |
| Model No. |
Outlet 45° CW from Inlet |
| Rotation |
Outlet 90° CCW from Inlet |
| Pump Series |
3/4 in Flange |
| Pilot Type |
1 in Flange |
| Weight |
1.7 |