SH200-5 Excavator Engine 4HK1 Water Pump 8-98022822-1
| Shaft Seal Type: |
75.0 LB |
| Shaft Length: |
Flange Mount |
| Displacement Shaft End (cu in/revolution): |
Left Hand (CCW) |
| Manufacturer Part No.: |
3520VQ35A12-11AA20-LH |
| Spline Description: |
3 |
| Controlled Flow Rate: |
Flange |
| Port Size: |
N/A |
| Relief Valve Setting: |
Standard Pilot |
| PDF |
|
Product Details
| Shaft Seal Type |
75.0 LB |
| Shaft Length |
Flange Mount |
| Displacement Shaft End (cu in/revolution) |
Left Hand (CCW) |
| Manufacturer Part No. |
3520VQ35A12-11AA20-LH |
| Spline Description |
3 |
| Controlled Flow Rate |
Flange |
| Port Size |
N/A |
| Relief Valve Setting |
Standard Pilot |
| Minor Diameter |
1.25 in |
| Shaft Type |
14 Tooth Splined |
| GPM @ 1,800 rpm, Cover End |
3520VQ |
| Pressure Port Size, Cover End |
1 15/16 in |
| Displacement Cover End (cu in/revolution) |
Buna-N |
| Weight |
2400 |
| Mounting |
1.04 in |
| Pilot Type |
SAE C, 2 Bolt |
| Rotation |
Single Shaft Seal |
| Minor Diameter [Max |
12/24 |
| Pump Series |
2500 |
| Port Type |
2400 |
| Major Diameter [Min |
N/A |
| GPM @ 1,800 rpm, Shaft End |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Integral Valve Configuration |
1.248 in |
| Shaft End Pressure [Max |
1.247 in |
| Shaft Key |
N/A |
| Cover End Pressure [Max |
N/A |
| Model No. |
N/A |
| Shaft End Flow @ RPM |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Port Orientation - Cover End |
3520VQ35A12-11AA20-LH |
| Shaft End RPM [Max |
2300 |
| Port Orientation - Shaft End |
3000 |
| Pressure Port Size, Shaft End |
18 |
| Minor Diameter [Min |
52.5 |
| Shaft Dia. |
w/o Integral Valves |
| Mounting Flange |
Outlet 135° CCW from Inlet |
| Cover End Flow @ RPM |
Outlet Opposite Inlet |
| Seal Material |
3/4 in Flange |
| Cover End RPM [Max |
1 1/4 in Flange |
| Max. RPM [Max |
2.41 |
| Major Diameter [Max |
6.88 |