Hydraulic Cooling Water Pump Assembly For Engine Parts
| Weight: |
45.0 LB |
| Controlled Flow Rate: |
Flange Mount |
| Shaft End Flow @ RPM: |
Right Hand (CW) |
| Shaft Type: |
2520VQ21A11-11DD20 |
| Integral Valve Configuration: |
2 1/2 |
| Seal Material: |
Flange |
| Port Orientation - Shaft End: |
N/A |
| Displacement Shaft End (cu in/revolution): |
Standard Pilot |
| PDF |
|
Product Details
| Weight |
45.0 LB |
| Controlled Flow Rate |
Flange Mount |
| Shaft End Flow @ RPM |
Right Hand (CW) |
| Shaft Type |
2520VQ21A11-11DD20 |
| Integral Valve Configuration |
2 1/2 |
| Seal Material |
Flange |
| Port Orientation - Shaft End |
N/A |
| Displacement Shaft End (cu in/revolution) |
Standard Pilot |
| Pump Series |
0.875 in |
| Cover End RPM [Max |
13 Tooth Splined |
| Port Orientation - Cover End |
2520VQ |
| Displacement Cover End (cu in/revolution) |
1.375 in |
| Cover End Flow @ RPM |
Buna-N |
| Rotation |
2500 |
| Shaft End Pressure [Max |
0.715 in |
| Shaft Key |
SAE B, 2 Bolt |
| Pilot Type |
Single Shaft Seal |
| Max. RPM [Max |
16/32 |
| Cover End Pressure [Max |
2700 |
| Mounting |
2500 |
| Mounting Flange |
N/A |
| Shaft Length |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Port Size |
0.873 in |
| Minor Diameter [Max |
0.872 in |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Shaft Dia. |
N/A |
| Manufacturer Part No. |
N/A |
| Port Type |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Minor Diameter |
2520VQ21A11-11DD20 |
| GPM @ 1,800 rpm, Cover End |
3000 |
| Major Diameter [Max |
3000 |
| Spline Description |
16.5 |
| Model No. |
31.5 |
| Major Diameter [Min |
w/o Integral Valves |
| Relief Valve Setting |
Outlet 135° CW from Inlet |
| Shaft End RPM [Max |
Outlet 90° CW from Inlet |
| Shaft Seal Type |
3/4 in Flange |
| Minor Diameter [Min |
1 in Flange |
| Pressure Port Size, Cover End |
2.22 |
| Pressure Port Size, Shaft End |
4.12 |