Bulldozer D41A-6 Hydraulic Gear Oil Pump 705-52-21070 for Komatsu Parts
| Port Orientation - Shaft End: |
76.0 LB |
| Shaft End Flow @ RPM: |
Flange Mount |
| Relief Valve Setting: |
Left Hand (CCW) |
| Cover End Flow @ RPM: |
3525V35A17-11AA22L |
| Controlled Flow Rate: |
3 |
| Shaft Type: |
Flange |
| Port Orientation - Cover End: |
N/A |
| Port Type: |
Standard Pilot |
| PDF |
|
Product Details
| Port Orientation - Shaft End |
76.0 LB |
| Shaft End Flow @ RPM |
Flange Mount |
| Relief Valve Setting |
Left Hand (CCW) |
| Cover End Flow @ RPM |
3525V35A17-11AA22L |
| Controlled Flow Rate |
3 |
| Shaft Type |
Flange |
| Port Orientation - Cover End |
N/A |
| Port Type |
Standard Pilot |
| Pressure Port Size, Cover End |
1.375 in |
| Shaft Dia. |
14 Tooth Splined |
| Shaft Length |
3525V |
| Pump Series |
2.3125 in |
| Weight |
Buna-N |
| Seal Material |
1800 |
| Rotation |
1.055 in |
| Manufacturer Part No. |
SAE C, 2 Bolt |
| Integral Valve Configuration |
Single Shaft Seal |
| Pressure Port Size, Shaft End |
12/24 |
| GPM @ 1,800 rpm, Cover End |
1800 |
| GPM @ 1,800 rpm, Shaft End |
1800 |
| Cover End Pressure [Max |
N/A |
| Shaft End Pressure [Max |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Minor Diameter [Min |
1.25 in |
| Mounting Flange |
1.247 in |
| Minor Diameter [Max |
1.06 in |
| Displacement Cover End (cu in/revolution) |
1.05 in |
| Pilot Type |
N/A |
| Shaft End RPM [Max |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Port Size |
3525V35A17-11AA22L |
| Max. RPM [Max |
2500 |
| Major Diameter [Max |
2500 |
| Model No. |
25.5 |
| Displacement Shaft End (cu in/revolution) |
52.5 |
| Minor Diameter |
N/A |
| Spline Description |
Outlet 135° CCW from Inlet |
| Major Diameter [Min |
Outlet Opposite Inlet |
| Cover End RPM [Max |
1 in Code 61 |
| Mounting |
1 1/4 in Code 61 |
| Shaft Key |
3.4 |
| Shaft Seal Type |
6.8 |