Hydraulic Main Pump 123-2235 for Excavator CAT 330B
| Max. RPM [Max: |
30.0 LB |
| Shaft End RPM [Max: |
Flange Mount |
| Minor Diameter [Max: |
Right Hand (CW) |
| Rotation: |
V2010-1F11S5S-11CC12 |
| Shaft Dia.: |
1.5 |
| Major Diameter [Max: |
Flange |
| Controlled Flow Rate: |
N/A |
| Shaft Length: |
N/A |
| PDF |
|
Product Details
| Max. RPM [Max |
30.0 LB |
| Shaft End RPM [Max |
Flange Mount |
| Minor Diameter [Max |
Right Hand (CW) |
| Rotation |
V2010-1F11S5S-11CC12 |
| Shaft Dia. |
1.5 |
| Major Diameter [Max |
Flange |
| Controlled Flow Rate |
N/A |
| Shaft Length |
N/A |
| Pump Series |
0.875 in |
| Shaft Type |
13 Tooth Splined |
| Pilot Type |
V2010 |
| Integral Valve Configuration |
1 5/16 in |
| Cover End Flow @ RPM |
Double |
| GPM @ 1,800 rpm, Cover End |
Buna-N |
| Mounting Flange |
2500 |
| Pressure Port Size, Shaft End |
0.728 in |
| Shaft End Pressure [Max |
SAE B, 2 Bolt |
| Port Size |
Single Shaft Seal |
| Spline Description |
16/32 |
| Manufacturer Part No. |
3000 |
| Cover End Pressure [Max |
2500 |
| Port Orientation - Cover End |
N/A |
| GPM @ 1,800 rpm, Shaft End |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Minor Diameter [Min |
0.873 in |
| Port Orientation - Shaft End |
0.872 in |
| Major Diameter [Min |
0.734 in |
| Shaft Key |
0.723 in |
| Mounting |
N/A |
| Weight |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End |
V2010-1F11S5S-11CC12 |
| Displacement Shaft End (cu in/revolution) |
2.2 |
| Shaft End Flow @ RPM |
2500 |
| Relief Valve Setting |
7.5 |
| Model No. |
16.5 |
| Port Type |
N/A |
| Displacement Cover End (cu in/revolution) |
Outlet 45° CW from Inlet |
| Shaft Seal Type |
Outlet Inline w/Inlet |
| Minor Diameter |
1/2 in SAE O-Ring |
| Seal Material |
3/4 in SAE O-Ring |
| Cover End RPM [Max |
1 |