3G7658 3G2750 3G7659 4K4835 7J0880 7J7962 Hydraulic Vane Pump Cartridge Kit 20VQ14 used Excavator CAT Pump
| Cover End Flow @ RPM: |
101.0 LB |
| Integral Valve Configuration: |
Flange Mount |
| Shaft Seal Type: |
Right Hand (CW) |
| Pilot Type: |
4525VQ50A21-11BB20 |
| Shaft Type: |
3 1/2 |
| GPM @ 1,800 rpm, Cover End: |
Flange |
| Shaft Dia.: |
N/A |
| Shaft End Flow @ RPM: |
Standard Pilot |
| PDF |
|
Product Details
| Cover End Flow @ RPM |
101.0 LB |
| Integral Valve Configuration |
Flange Mount |
| Shaft Seal Type |
Right Hand (CW) |
| Pilot Type |
4525VQ50A21-11BB20 |
| Shaft Type |
3 1/2 |
| GPM @ 1,800 rpm, Cover End |
Flange |
| Shaft Dia. |
N/A |
| Shaft End Flow @ RPM |
Standard Pilot |
| Pump Series |
1.25 in |
| Port Size |
14 Tooth Splined |
| Shaft Key |
4525VQ |
| Mounting |
1 15/16 in |
| Major Diameter [Max |
Buna-N |
| Rotation |
2200 |
| Manufacturer Part No. |
1.04 in |
| Shaft Length |
SAE C, 2 Bolt |
| Shaft End RPM [Max |
Single Shaft Seal |
| Port Orientation - Cover End |
12/24 |
| Displacement Cover End (cu in/revolution) |
2200 |
| Seal Material |
2200 |
| Major Diameter [Min |
N/A |
| Pressure Port Size, Shaft End |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Model No. |
1.248 in |
| Pressure Port Size, Cover End |
1.247 in |
| Spline Description |
N/A |
| Shaft End Pressure [Max |
N/A |
| Minor Diameter |
N/A |
| Port Type |
50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm |
| Relief Valve Setting |
4525VQ50A21-11BB20 |
| Cover End Pressure [Max |
3000 |
| GPM @ 1,800 rpm, Shaft End |
2500 |
| Cover End RPM [Max |
31.5 |
| Controlled Flow Rate |
75 |
| Displacement Shaft End (cu in/revolution) |
w/o Integral Valves |
| Mounting Flange |
Outlet 45° CCW from Inlet |
| Max. RPM [Max |
Outlet 90° CCW from Inlet |
| Minor Diameter [Max |
1 in Flange |
| Minor Diameter [Min |
1 1/2 in Flange |
| Weight |
4.12 |
| Port Orientation - Shaft End |
9.9 |