Replace Caterpillar Wheel Loader 910 Hydraulic Gear Pump 8J8813
| Port Size: |
101.0 LB |
| Shaft Seal Type: |
Flange Mount |
| Shaft End Pressure [Max: |
Left Hand (CCW) |
| Manufacturer Part No.: |
4525VQ50A17-11AA20-LH |
| GPM @ 1,800 rpm, Shaft End: |
3 1/2 |
| Pump Series: |
Flange |
| Minor Diameter: |
N/A |
| Pressure Port Size, Cover End: |
Standard Pilot |
| PDF |
|
Product Details
| Port Size |
101.0 LB |
| Shaft Seal Type |
Flange Mount |
| Shaft End Pressure [Max |
Left Hand (CCW) |
| Manufacturer Part No. |
4525VQ50A17-11AA20-LH |
| GPM @ 1,800 rpm, Shaft End |
3 1/2 |
| Pump Series |
Flange |
| Minor Diameter |
N/A |
| Pressure Port Size, Cover End |
Standard Pilot |
| Pilot Type |
1.25 in |
| Cover End RPM [Max |
14 Tooth Splined |
| Mounting Flange |
4525VQ |
| Port Orientation - Cover End |
1 15/16 in |
| Spline Description |
Buna-N |
| Mounting |
2200 |
| Relief Valve Setting |
1.04 in |
| Integral Valve Configuration |
SAE C, 2 Bolt |
| Port Orientation - Shaft End |
Single Shaft Seal |
| Max. RPM [Max |
12/24 |
| Model No. |
2200 |
| GPM @ 1,800 rpm, Cover End |
2200 |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Shaft End Flow @ RPM |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
1.248 in |
| Port Type |
1.247 in |
| Shaft End RPM [Max |
N/A |
| Minor Diameter [Max |
N/A |
| Rotation |
N/A |
| Shaft Dia. |
50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm |
| Shaft Key |
4525VQ50A17-11AA20-LH |
| Minor Diameter [Min |
3000 |
| Controlled Flow Rate |
2500 |
| Shaft Type |
25.5 |
| Weight |
75 |
| Cover End Flow @ RPM |
w/o Integral Valves |
| Seal Material |
Outlet 135° CCW from Inlet |
| Shaft Length |
Outlet Opposite Inlet |
| Major Diameter [Min |
1 in Flange |
| Cover End Pressure [Max |
1 1/2 in Flange |
| Pressure Port Size, Shaft End |
3.37 |
| Displacement Cover End (cu in/revolution) |
9.9 |