D135A;D155A Bulldozer Gear Hydraulic Scavenge Pump 175-13-23500
| Cover End Pressure [Max: |
30.0 LB |
| Pilot Type: |
Flange Mount |
| Pump Series: |
Left Hand (CCW) |
| Rotation: |
V2010-1F11S4S-11CC12LH |
| Shaft Seal Type: |
1 1/2 |
| Integral Valve Configuration: |
Flange |
| Shaft Length: |
N/A |
| Port Orientation - Shaft End: |
N/A |
| PDF |
|
Product Details
| Cover End Pressure [Max |
30.0 LB |
| Pilot Type |
Flange Mount |
| Pump Series |
Left Hand (CCW) |
| Rotation |
V2010-1F11S4S-11CC12LH |
| Shaft Seal Type |
1 1/2 |
| Integral Valve Configuration |
Flange |
| Shaft Length |
N/A |
| Port Orientation - Shaft End |
N/A |
| Shaft End RPM [Max |
0.875 in |
| Model No. |
13 Tooth Splined |
| Relief Valve Setting |
V2010 |
| GPM @ 1,800 rpm, Cover End |
1 5/16 in |
| Displacement Cover End (cu in/revolution) |
Buna-N |
| GPM @ 1,800 rpm, Shaft End |
2500 |
| Minor Diameter [Max |
0.728 in |
| Cover End RPM [Max |
SAE B, 2 Bolt |
| Major Diameter [Max |
Single Shaft Seal |
| Spline Description |
16/32 |
| Shaft Dia. |
3000 |
| Port Type |
2500 |
| Seal Material |
N/A |
| Mounting |
4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm |
| Controlled Flow Rate |
0.873 in |
| Shaft End Flow @ RPM |
0.872 in |
| Port Orientation - Cover End |
0.7335 in |
| Major Diameter [Min |
0.7225 in |
| Shaft End Pressure [Max |
N/A |
| Cover End Flow @ RPM |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) |
V2010-1F11S4S-11CC12LH |
| Shaft Key |
2500 |
| Pressure Port Size, Cover End |
2500 |
| Port Size |
6 |
| Manufacturer Part No. |
16.5 |
| Max. RPM [Max |
N/A |
| Shaft Type |
Outlet 45° CW from Inlet |
| Mounting Flange |
Outlet Inline w/Inlet |
| Minor Diameter |
1/2 in SAE O-Ring |
| Minor Diameter [Min |
3/4 in SAE O-Ring |
| Weight |
0.8 |
| Pressure Port Size, Shaft End |
2.22 |