Hydstar Hydraulic Pump Cartridge for Replacement Vickers
| Minor Diameter: |
76.0 LB |
| Port Orientation - Shaft End: |
Flange Mount |
| Weight: |
Left Hand (CCW) |
| Port Type: |
3525VQ30A12-11CC20-LH |
| Shaft End Pressure [Max: |
3 |
| Pilot Type: |
Flange |
| Mounting: |
N/A |
| Minor Diameter [Max: |
Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter |
76.0 LB |
| Port Orientation - Shaft End |
Flange Mount |
| Weight |
Left Hand (CCW) |
| Port Type |
3525VQ30A12-11CC20-LH |
| Shaft End Pressure [Max |
3 |
| Pilot Type |
Flange |
| Mounting |
N/A |
| Minor Diameter [Max |
Standard Pilot |
| Seal Material |
1.25 in |
| Major Diameter [Min |
14 Tooth Splined |
| Pressure Port Size, Shaft End |
3525VQ |
| Shaft End Flow @ RPM |
1 15/16 in |
| Max. RPM [Max |
Buna-N |
| Minor Diameter [Min |
2500 |
| Rotation |
1.04 in |
| Shaft Length |
SAE C, 2 Bolt |
| Mounting Flange |
Single Shaft Seal |
| Shaft Key |
12/24 |
| Port Orientation - Cover End |
2500 |
| Relief Valve Setting |
2500 |
| Shaft Dia. |
N/A |
| Shaft Seal Type |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
1.248 in |
| Spline Description |
1.247 in |
| Model No. |
N/A |
| Cover End Flow @ RPM |
N/A |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Cover End Pressure [Max |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End |
3525VQ30A12-11CC20-LH |
| Displacement Cover End (cu in/revolution) |
3000 |
| Major Diameter [Max |
3000 |
| Shaft End RPM [Max |
18 |
| Cover End RPM [Max |
45 |
| Integral Valve Configuration |
w/o Integral Valves |
| Pressure Port Size, Cover End |
Outlet 45° CW from Inlet |
| Shaft Type |
Outlet Inline w/Inlet |
| Controlled Flow Rate |
1 in Flange |
| Port Size |
1 1/4 in Flange |
| Manufacturer Part No. |
2.45 |
| Pump Series |
5.96 |