Concrete Mixer Roller Gear Structure Charge pump MPV42 PV42 for Sauer
| Seal Material: |
30.0 LB |
| Shaft End Pressure [Max: |
Flange Mount |
| Shaft Type: |
Left Hand (CCW) |
| Pump Series: |
V2010-1F11S6S-11CB12L |
| Mounting Flange: |
1.5 |
| Shaft Key: |
Flange |
| Shaft End RPM [Max: |
N/A |
| Cover End Pressure [Max: |
N/A |
| PDF |
|
Product Details
| Seal Material |
30.0 LB |
| Shaft End Pressure [Max |
Flange Mount |
| Shaft Type |
Left Hand (CCW) |
| Pump Series |
V2010-1F11S6S-11CB12L |
| Mounting Flange |
1.5 |
| Shaft Key |
Flange |
| Shaft End RPM [Max |
N/A |
| Cover End Pressure [Max |
N/A |
| Pressure Port Size, Cover End |
0.875 in |
| Port Orientation - Cover End |
13 Tooth Splined |
| Spline Description |
V2010 |
| Pressure Port Size, Shaft End |
1 5/16 in |
| Displacement Shaft End (cu in/revolution) |
2.2 |
| Port Type |
Buna-N |
| Controlled Flow Rate |
2500 |
| GPM @ 1,800 rpm, Shaft End |
0.728 in |
| Pilot Type |
SAE B, 2 Bolt |
| Shaft Length |
Single Shaft Seal |
| Minor Diameter |
16/32 |
| Displacement Cover End (cu in/revolution) |
3000 |
| Major Diameter [Min |
2500 |
| Weight |
N/A |
| Minor Diameter [Max |
6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Model No. |
0.873 in |
| Major Diameter [Max |
0.872 in |
| Manufacturer Part No. |
0.734 in |
| Shaft Seal Type |
0.723 in |
| Port Size |
N/A |
| GPM @ 1,800 rpm, Cover End |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Relief Valve Setting |
V2010-1F11S6S-11CB12L |
| Port Orientation - Shaft End |
2200 |
| Shaft Dia. |
2500 |
| Integral Valve Configuration |
9 |
| Mounting |
16.5 |
| Shaft End Flow @ RPM |
N/A |
| Rotation |
Outlet 45° CCW from Inlet |
| Cover End Flow @ RPM |
Outlet Inline w/Inlet |
| Minor Diameter [Min |
1/2 in SAE O-Ring |
| Max. RPM [Max |
3/4 in SAE O-Ring |
| Cover End RPM [Max |
1.2 |