New Aftermarket SAA6D170 High Pressure Engine Oil Pump 6240-51-1100
| Seal Material: |
76.0 LB |
| Minor Diameter [Min: |
Flange Mount |
| Displacement Shaft End (cu in/revolution): |
Left Hand (CCW) |
| Shaft Dia.: |
3525VQ30A21-11AA20-LH |
| Shaft End RPM [Max: |
3 |
| Displacement Cover End (cu in/revolution): |
Flange |
| Weight: |
N/A |
| Manufacturer Part No.: |
Standard Pilot |
| PDF |
|
Product Details
| Seal Material |
76.0 LB |
| Minor Diameter [Min |
Flange Mount |
| Displacement Shaft End (cu in/revolution) |
Left Hand (CCW) |
| Shaft Dia. |
3525VQ30A21-11AA20-LH |
| Shaft End RPM [Max |
3 |
| Displacement Cover End (cu in/revolution) |
Flange |
| Weight |
N/A |
| Manufacturer Part No. |
Standard Pilot |
| Shaft End Flow @ RPM |
1.25 in |
| Mounting |
14 Tooth Splined |
| Pump Series |
3525VQ |
| Shaft Seal Type |
1.9375 in |
| Relief Valve Setting |
Buna-N |
| Mounting Flange |
2500 |
| Minor Diameter [Max |
1.04 in |
| Cover End Pressure [Max |
SAE C, 2 Bolt |
| Port Orientation - Cover End |
Single Shaft Seal |
| Spline Description |
12/24 |
| Controlled Flow Rate |
2500 |
| Shaft Key |
2500 |
| Shaft End Pressure [Max |
N/A |
| Shaft Type |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Max. RPM [Max |
1.248 in |
| Rotation |
1.247 in |
| Port Type |
N/A |
| Integral Valve Configuration |
N/A |
| Pressure Port Size, Cover End |
N/A |
| Cover End Flow @ RPM |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End |
3525VQ30A21-11AA20-LH |
| Port Orientation - Shaft End |
3000 |
| Cover End RPM [Max |
3000 |
| Model No. |
31.5 |
| Shaft Length |
45 |
| Port Size |
w/o Integral Valves |
| Major Diameter [Min |
Outlet 135° CCW from Inlet |
| Pilot Type |
Outlet Opposite Inlet |
| GPM @ 1,800 rpm, Shaft End |
1 in Flange |
| GPM @ 1,800 rpm, Cover End |
1 1/4 in Flange |
| Major Diameter [Max |
4.12 |
| Minor Diameter |
5.96 |