Excavator CAT 330C Kit Arm Oil Cylinder Seal Kits 1915649 for Caterpillar
| Model No.: |
45.0 LB |
| Displacement Shaft End (cu in/revolution): |
Flange Mount |
| Port Type: |
Right Hand (CW) |
| Pressure Port Size, Shaft End: |
2520VQ17A5-1DC20 |
| Pump Series: |
2 1/2 |
| Cover End RPM [Max: |
Flange |
| Shaft Seal Type: |
3/16 in |
| Displacement Cover End (cu in/revolution): |
Standard Pilot |
| PDF |
|
Product Details
| Model No. |
45.0 LB |
| Displacement Shaft End (cu in/revolution) |
Flange Mount |
| Port Type |
Right Hand (CW) |
| Pressure Port Size, Shaft End |
2520VQ17A5-1DC20 |
| Pump Series |
2 1/2 |
| Cover End RPM [Max |
Flange |
| Shaft Seal Type |
3/16 in |
| Displacement Cover End (cu in/revolution) |
Standard Pilot |
| Cover End Pressure [Max |
0.875 in |
| Pressure Port Size, Cover End |
Straight w/ Key |
| Port Size |
2520VQ |
| Controlled Flow Rate |
1.9375 in |
| Shaft Length |
Buna-N |
| GPM @ 1,800 rpm, Shaft End |
2500 |
| Shaft End RPM [Max |
N/A |
| Mounting Flange |
SAE B, 2 Bolt |
| Manufacturer Part No. |
Single Shaft Seal |
| Mounting |
N/A |
| Integral Valve Configuration |
2700 |
| Port Orientation - Shaft End |
2500 |
| Major Diameter [Max |
N/A |
| Minor Diameter [Max |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Cover End Flow @ RPM |
N/A |
| Shaft Dia. |
N/A |
| Max. RPM [Max |
N/A |
| Pilot Type |
N/A |
| Major Diameter [Min |
N/A |
| Weight |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM |
2520VQ17A5-1DC20 |
| Spline Description |
3000 |
| Shaft End Pressure [Max |
3000 |
| GPM @ 1,800 rpm, Cover End |
7.5 |
| Relief Valve Setting |
25.5 |
| Minor Diameter |
w/o Integral Valves |
| Minor Diameter [Min |
Outlet 45° CW from Inlet |
| Seal Material |
Outlet 90° CW from Inlet |
| Shaft Key |
3/4 in Flange |
| Shaft Type |
1 in Flange |
| Rotation |
1.1 |
| Port Orientation - Cover End |
3.37 |