DSG-03-3C12/ DSG03-3c12 Hydraulic Spool Control Valve
| Minor Diameter: |
45.0 LB |
| Port Type: |
Flange Mount |
| Port Orientation - Shaft End: |
Right Hand (CW) |
| Model No.: |
2520VQ17A11-11BA20 |
| Shaft Length: |
2 1/2 |
| Max. RPM [Max: |
Flange |
| Major Diameter [Max: |
N/A |
| Pilot Type: |
Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter |
45.0 LB |
| Port Type |
Flange Mount |
| Port Orientation - Shaft End |
Right Hand (CW) |
| Model No. |
2520VQ17A11-11BA20 |
| Shaft Length |
2 1/2 |
| Max. RPM [Max |
Flange |
| Major Diameter [Max |
N/A |
| Pilot Type |
Standard Pilot |
| Cover End Pressure [Max |
0.875 in |
| Shaft End Pressure [Max |
13 Tooth Splined |
| Pressure Port Size, Cover End |
2520VQ |
| Seal Material |
1 3/8 in |
| Integral Valve Configuration |
Buna-N |
| Cover End Flow @ RPM |
2500 |
| Shaft End Flow @ RPM |
0.715 in |
| GPM @ 1,800 rpm, Cover End |
SAE B, 2 Bolt |
| Cover End RPM [Max |
Single Shaft Seal |
| Controlled Flow Rate |
16/32 |
| Mounting Flange |
2700 |
| Mounting |
2500 |
| Minor Diameter [Max |
N/A |
| Weight |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Port Orientation - Cover End |
0.873 in |
| Shaft End RPM [Max |
0.872 in |
| Shaft Key |
N/A |
| Minor Diameter [Min |
N/A |
| Port Size |
N/A |
| Displacement Cover End (cu in/revolution) |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Rotation |
2520VQ17A11-11BA20 |
| Shaft Seal Type |
3000 |
| Shaft Type |
3000 |
| Shaft Dia. |
16.5 |
| Pressure Port Size, Shaft End |
25.5 |
| Spline Description |
w/o Integral Valves |
| Relief Valve Setting |
Outlet 135° CCW from Inlet |
| Displacement Shaft End (cu in/revolution) |
Outlet 90° CCW from Inlet |
| Pump Series |
3/4 in Flange |
| Manufacturer Part No. |
1 in Flange |
| GPM @ 1,800 rpm, Shaft End |
2.22 |
| Major Diameter [Min |
3.37 |