CBNSL Hydraulic Triple Gear Pump for Mining Machinery
| Shaft Dia.: |
35.0 LB |
| Displacement Cover End (cu in/revolution): |
Flange Mount |
| Shaft Length: |
Right Hand (CW) |
| Minor Diameter [Min: |
V2020-1F11S7S-1DD30 |
| Shaft End Pressure [Max: |
2 |
| Port Type: |
Flange |
| Weight: |
3/16 in |
| Port Orientation - Cover End: |
N/A |
| PDF |
|
Product Details
| Shaft Dia. |
35.0 LB |
| Displacement Cover End (cu in/revolution) |
Flange Mount |
| Shaft Length |
Right Hand (CW) |
| Minor Diameter [Min |
V2020-1F11S7S-1DD30 |
| Shaft End Pressure [Max |
2 |
| Port Type |
Flange |
| Weight |
3/16 in |
| Port Orientation - Cover End |
N/A |
| Shaft End Flow @ RPM |
0.875 in |
| Cover End Flow @ RPM |
Straight w/ Key |
| Cover End Pressure [Max |
V2020 |
| Shaft Key |
2 5/16 in |
| GPM @ 1,800 rpm, Cover End |
Buna-N |
| Relief Valve Setting |
2500 |
| Controlled Flow Rate |
N/A |
| Seal Material |
SAE B, 2 Bolt |
| Pilot Type |
Single Shaft Seal |
| Major Diameter [Max |
N/A |
| Pump Series |
2500 |
| Rotation |
2500 |
| Spline Description |
N/A |
| GPM @ 1,800 rpm, Shaft End |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Cover End RPM [Max |
N/A |
| Pressure Port Size, Cover End |
N/A |
| Minor Diameter |
N/A |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Minor Diameter [Max |
N/A |
| Mounting |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Shaft Seal Type |
V2020-1F11S7S-1DD30 |
| Max. RPM [Max |
2500 |
| Integral Valve Configuration |
2500 |
| Port Size |
10.5 |
| Pressure Port Size, Shaft End |
16.5 |
| Mounting Flange |
N/A |
| Model No. |
Outlet 90° CW from Inlet |
| Shaft End RPM [Max |
Outlet 90° CW from Inlet |
| Shaft Type |
3/4 in SAE O-Ring |
| Port Orientation - Shaft End |
3/4 in SAE O-Ring |
| Manufacturer Part No. |
1.39 |
| Major Diameter [Min |
2.22 |