SKF 51203/W64 Thrust Ball Bearing
With over 10170 full-service stores, our SKF 51203/W64 Thrust Ball Bearing inventory is extensive and 52 mm D our parts are priced right. 1210 lbf axial static load capacity: within 24 hours. This helps you 361204 R Bearing number maximize your productivity by saving time and BEARING SUDAMERICANA,S.A. your hard-earned dollars.
What is 51203/W64 bearing cross reference？
| Brand Name: |
SKF |
| Model Number: |
51203/W64 |
| Displacement Cover End (cu in/revolution): |
76.0 LB |
| Port Orientation - Cover End: |
Flange Mount |
| Weight: |
Right Hand (CW) |
| Minor Diameter [Max: |
3525VQ25A21-11CC20 |
| Major Diameter [Max: |
3 |
| Seal Material: |
Flange |
| Shaft Seal Type: |
N/A |
| Cover End RPM [Max: |
Standard Pilot |
Product Details
| Displacement Cover End (cu in/revolution) |
76.0 LB |
| Port Orientation - Cover End |
Flange Mount |
| Weight |
Right Hand (CW) |
| Minor Diameter [Max |
3525VQ25A21-11CC20 |
| Major Diameter [Max |
3 |
| Seal Material |
Flange |
| Shaft Seal Type |
N/A |
| Cover End RPM [Max |
Standard Pilot |
| Port Type |
1.25 in |
| Shaft End Pressure [Max |
14 Tooth Splined |
| Displacement Shaft End (cu in/revolution) |
3525VQ |
| Max. RPM [Max |
1.9375 in |
| Cover End Pressure [Max |
Buna-N |
| Shaft Type |
2500 |
| Pump Series |
1.04 in |
| Mounting Flange |
SAE C, 2 Bolt |
| Manufacturer Part No. |
Single Shaft Seal |
| Shaft End Flow @ RPM |
12/24 |
| Shaft Length |
2500 |
| Mounting |
2500 |
| Port Size |
N/A |
| Major Diameter [Min |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Minor Diameter [Min |
1.248 in |
| Minor Diameter |
1.247 in |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Rotation |
N/A |
| Model No. |
N/A |
| GPM @ 1,800 rpm, Cover End |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Pilot Type |
3525VQ25A21-11CC20 |
| Shaft End RPM [Max |
3000 |
| Shaft Key |
3000 |
| Integral Valve Configuration |
31.5 |
| Pressure Port Size, Cover End |
37.5 |
| Port Orientation - Shaft End |
w/o Integral Valves |
| Cover End Flow @ RPM |
Outlet 45° CW from Inlet |
| Spline Description |
Outlet Inline w/Inlet |
| Pressure Port Size, Shaft End |
1 in Flange |
| Relief Valve Setting |
1 1/4 in Flange |
| Controlled Flow Rate |
4.12 |
| Shaft Dia. |
4.98 |