2.165 Inch | 55 Millimeter x 3.937 Inch | 100 Millimeter x 1.654 Inch | 42 Millimeter SKF 7211 ACD/P4ADFB Precision Ball Bearings
Question2.165 Inch | 55 Millimeter x 3.937 Inch | 100 Millimeter x 1.654 Inch | 42 Millimeter SKF 7211 ACD/P4ADFB Precision Ball Bearings ? Find what you need faster by BEARING SUDAMERICANA,S.A. entering your SKF Bearing 2.165 Inch | 55 Millimeter x 3.937 Inch | 100 Millimeter x 1.654 Inch | 42 Millimeter information .
What is 7211 ACD/P4ADFB bearing interchange？
| Brand Name: |
SKF |
| Model Number: |
7211 ACD/P4ADFB |
| Shaft Dia.: |
75.0 LB |
| Minor Diameter: |
Flange Mount |
| Shaft Length: |
Right Hand (CW) |
| Shaft Type: |
3520VQ30A5-11DD20 |
| Weight: |
3 |
| Cover End RPM [Max: |
Flange |
| Model No.: |
N/A |
| Pump Series: |
Standard Pilot |
Product Details
| Shaft Dia. |
75.0 LB |
| Minor Diameter |
Flange Mount |
| Shaft Length |
Right Hand (CW) |
| Shaft Type |
3520VQ30A5-11DD20 |
| Weight |
3 |
| Cover End RPM [Max |
Flange |
| Model No. |
N/A |
| Pump Series |
Standard Pilot |
| Controlled Flow Rate |
1.25 in |
| Shaft Key |
14 Tooth Splined |
| Pressure Port Size, Cover End |
3520VQ |
| Max. RPM [Max |
1 15/16 in |
| Minor Diameter [Min |
Buna-N |
| Manufacturer Part No. |
2500 |
| Cover End Flow @ RPM |
1.04 in |
| Shaft End RPM [Max |
SAE C, 2 Bolt |
| Port Orientation - Shaft End |
Single Shaft Seal |
| Displacement Cover End (cu in/revolution) |
12/24 |
| GPM @ 1,800 rpm, Cover End |
2500 |
| Integral Valve Configuration |
2500 |
| Mounting |
N/A |
| Mounting Flange |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Port Orientation - Cover End |
1.248 in |
| Relief Valve Setting |
1.247 in |
| Rotation |
N/A |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Port Type |
N/A |
| Pilot Type |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM |
3520VQ30A5-11DD20 |
| Minor Diameter [Max |
3000 |
| Displacement Shaft End (cu in/revolution) |
3000 |
| Shaft Seal Type |
7.5 |
| Major Diameter [Min |
45 |
| Pressure Port Size, Shaft End |
w/o Integral Valves |
| Cover End Pressure [Max |
Outlet 135° CW from Inlet |
| Shaft End Pressure [Max |
Outlet 90° CW from Inlet |
| Major Diameter [Max |
3/4 in Flange |
| Spline Description |
1 1/4 in Flange |
| Seal Material |
1.1 |
| Port Size |
5.96 |