1.5 Inch | 38.1 Millimeter x 1.417 Inch | 35.992 Millimeter x 1.937 Inch | 49.2 Millimeter SKF P2BL 108-RM Pillow Block Bearings
YOU’LL FIND AN BEARING SUDAMERICANA,S.A. 37 mm da EXTENSIVE 80 mm Dx SELECTION OF 1.5 Inch | 38.1 Millimeter x 1.417 Inch | 35.992 Millimeter x 1.937 Inch | 49.2 Millimeter 1.5 Inch | 38.1 Millimeter x 1.417 Inch | 35.992 Millimeter x 1.937 Inch | 49.2 Millimeter SKF P2BL 108-RM Pillow Block Bearings FOR SALE.
What is P2BL 108-RM bearing cross reference？
| Brand Name: |
SKF |
| Model Number: |
P2BL 108-RM |
| Port Orientation - Shaft End: |
45.0 LB |
| Shaft Length: |
Flange Mount |
| Pressure Port Size, Shaft End: |
Left Hand (CCW) |
| Relief Valve Setting: |
2520VQ21A11-11DB20-LH |
| Cover End Pressure [Max: |
2 1/2 |
| Displacement Shaft End (cu in/revolution): |
Flange |
| Cover End RPM [Max: |
N/A |
| Seal Material: |
Standard Pilot |
Product Details
| Port Orientation - Shaft End |
45.0 LB |
| Shaft Length |
Flange Mount |
| Pressure Port Size, Shaft End |
Left Hand (CCW) |
| Relief Valve Setting |
2520VQ21A11-11DB20-LH |
| Cover End Pressure [Max |
2 1/2 |
| Displacement Shaft End (cu in/revolution) |
Flange |
| Cover End RPM [Max |
N/A |
| Seal Material |
Standard Pilot |
| Controlled Flow Rate |
0.875 in |
| Minor Diameter [Min |
13 Tooth Splined |
| Shaft End Pressure [Max |
2520VQ |
| Pilot Type |
1 3/8 in |
| GPM @ 1,800 rpm, Cover End |
Buna-N |
| Shaft Seal Type |
2500 |
| Spline Description |
0.715 in |
| Major Diameter [Max |
SAE B, 2 Bolt |
| Rotation |
Single Shaft Seal |
| Pressure Port Size, Cover End |
16/32 |
| Mounting Flange |
2700 |
| Pump Series |
2500 |
| Port Size |
N/A |
| Shaft Dia. |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
0.873 in |
| Shaft End Flow @ RPM |
0.872 in |
| Weight |
N/A |
| Mounting |
N/A |
| Shaft End RPM [Max |
N/A |
| Minor Diameter [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Port Orientation - Cover End |
2520VQ21A11-11DB20-LH |
| Minor Diameter |
3000 |
| Integral Valve Configuration |
3000 |
| Shaft Type |
16.5 |
| Max. RPM [Max |
31.5 |
| Port Type |
w/o Integral Valves |
| Major Diameter [Min |
Outlet 45° CCW from Inlet |
| Model No. |
Outlet 90° CW from Inlet |
| Shaft Key |
3/4 in Flange |
| GPM @ 1,800 rpm, Shaft End |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
2.22 |
| Cover End Flow @ RPM |
4.12 |