0 Inch | 0 Millimeter x 2.835 Inch | 72.009 Millimeter x 0.563 Inch | 14.3 Millimeter TIMKEN 19283-3 Tapered Roller Bearings
0 Inch | 0 Millimeter x 2.835 Inch | 72.009 Millimeter x 0.563 Inch | 14.3 Millimeter TIMKEN 19283-3 Tapered Roller Bearings Engineering BEARING SUDAMERICANA,S.A. Calculator , No Stroke Timken Bearing Manufacturing Service . 0 Inch | 0 Millimeter x 2.835 Inch | 72.009 Millimeter x 0.563 Inch | 14.3 Millimeter No Machining Get Your Free.
What is 19283-3 bearing cross reference？
| Brand Name: |
TIMKEN |
| Model Number: |
19283-3 |
| Mounting Flange: |
45.0 LB |
| Shaft End RPM [Max: |
Flange Mount |
| Shaft Seal Type: |
Left Hand (CCW) |
| Port Type: |
2520VQ17A5-1AA20-LH |
| Pump Series: |
2 1/2 |
| Port Size: |
Flange |
| Weight: |
3/16 in |
| Shaft Type: |
Standard Pilot |
Product Details
| Mounting Flange |
45.0 LB |
| Shaft End RPM [Max |
Flange Mount |
| Shaft Seal Type |
Left Hand (CCW) |
| Port Type |
2520VQ17A5-1AA20-LH |
| Pump Series |
2 1/2 |
| Port Size |
Flange |
| Weight |
3/16 in |
| Shaft Type |
Standard Pilot |
| Major Diameter [Min |
0.875 in |
| Port Orientation - Cover End |
Straight w/ Key |
| Max. RPM [Max |
2520VQ |
| Seal Material |
1 15/16 in |
| Cover End Flow @ RPM |
Buna-N |
| Controlled Flow Rate |
2500 |
| Shaft Length |
N/A |
| GPM @ 1,800 rpm, Cover End |
SAE B, 2 Bolt |
| Cover End RPM [Max |
Single Shaft Seal |
| Shaft Dia. |
N/A |
| Shaft Key |
2700 |
| Model No. |
2500 |
| Rotation |
N/A |
| Pilot Type |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Spline Description |
N/A |
| Minor Diameter [Min |
N/A |
| Pressure Port Size, Shaft End |
N/A |
| Manufacturer Part No. |
N/A |
| Mounting |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
2520VQ17A5-1AA20-LH |
| Displacement Shaft End (cu in/revolution) |
3000 |
| Minor Diameter |
3000 |
| Shaft End Pressure [Max |
7.5 |
| Relief Valve Setting |
25.5 |
| Displacement Cover End (cu in/revolution) |
w/o Integral Valves |
| Pressure Port Size, Cover End |
Outlet 135° CCW from Inlet |
| Port Orientation - Shaft End |
Outlet Opposite Inlet |
| Minor Diameter [Max |
3/4 in Flange |
| Cover End Pressure [Max |
1 in Flange |
| Integral Valve Configuration |
1.1 |
| Shaft End Flow @ RPM |
3.37 |