55 mm x 100 mm x 21 mm TIMKEN 211KDG Single Row Ball Bearings
The online 55 mm x 100 mm x 21 mm TIMKEN 211KDG Single Row Ball Bearings 55 mm x 100 mm x 21 mm parts store gives you immediate access to a BEARING SUDAMERICANA,S.A. selection of more than 1.4 million new, used, remanufactured.
What is 211KDG bearing cross reference？
| Brand Name: |
TIMKEN |
| Model Number: |
211KDG |
| Major Diameter [Min: |
45.0 LB |
| Manufacturer Part No.: |
Flange Mount |
| Mounting Flange: |
Left Hand (CCW) |
| Shaft Type: |
2520VQ12A12-1AA20LH |
| Cover End Pressure [Max: |
2 1/2 |
| GPM @ 1,800 rpm, Cover End: |
Flange |
| Model No.: |
3/16 in |
| Minor Diameter: |
Standard Pilot |
| PDF |
211KDG |
Product Details
| Major Diameter [Min |
45.0 LB |
| Manufacturer Part No. |
Flange Mount |
| Mounting Flange |
Left Hand (CCW) |
| Shaft Type |
2520VQ12A12-1AA20LH |
| Cover End Pressure [Max |
2 1/2 |
| GPM @ 1,800 rpm, Cover End |
Flange |
| Model No. |
3/16 in |
| Minor Diameter |
Standard Pilot |
| Pressure Port Size, Cover End |
0.875 in |
| Port Type |
Straight w/ Key |
| Cover End RPM [Max |
2520VQ |
| Displacement Cover End (cu in/revolution) |
1.9375 in |
| Pilot Type |
Buna-N |
| Shaft End RPM [Max |
2700 |
| Seal Material |
N/A |
| Cover End Flow @ RPM |
SAE B, 2 Bolt |
| Shaft Key |
Single Shaft Seal |
| Major Diameter [Max |
N/A |
| Minor Diameter [Max |
2700 |
| Port Size |
2700 |
| Shaft Seal Type |
N/A |
| Displacement Shaft End (cu in/revolution) |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Shaft Length |
N/A |
| Weight |
N/A |
| Port Orientation - Cover End |
N/A |
| Spline Description |
N/A |
| Shaft End Flow @ RPM |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Relief Valve Setting |
2520VQ12A12-1AA20LH |
| Minor Diameter [Min |
2300 |
| Pressure Port Size, Shaft End |
3000 |
| Rotation |
18 |
| Pump Series |
18 |
| Integral Valve Configuration |
w/o Integral Valves |
| Controlled Flow Rate |
Outlet 135° CCW from Inlet |
| Shaft Dia. |
Outlet Opposite Inlet |
| Mounting |
3/4 in Flange |
| Max. RPM [Max |
1 in Flange |
| Shaft End Pressure [Max |
2.41 |
| Port Orientation - Shaft End |
2.45 |