0 Inch | 0 Millimeter x 4.5 Inch | 114.3 Millimeter x 0.75 Inch | 19.05 Millimeter TIMKEN 29622BW-2 Tapered Roller Bearings
How do you find the BEARING SUDAMERICANA,S.A. 0 Inch | 0 Millimeter x 4.5 Inch | 114.3 Millimeter x 0.75 Inch | 19.05 Millimeter 0 Inch | 0 Millimeter x 4.5 Inch | 114.3 Millimeter x 0.75 Inch | 19.05 Millimeter TIMKEN 29622BW-2 Tapered Roller Bearings specification? Manufacturers Online 26 mm A1 Free check！
What is 29622BW-2 bearing interchange？
| Brand Name: |
TIMKEN |
| Model Number: |
29622BW-2 |
| Weight: |
75.0 LB |
| Shaft End Pressure [Max: |
Flange Mount |
| Port Orientation - Cover End: |
Right Hand (CW) |
| Cover End Flow @ RPM: |
3520VQ38A11-11BB20 |
| Shaft End RPM [Max: |
3 |
| Shaft Type: |
Flange |
| Mounting: |
N/A |
| Minor Diameter [Max: |
Standard Pilot |
Product Details
| Weight |
75.0 LB |
| Shaft End Pressure [Max |
Flange Mount |
| Port Orientation - Cover End |
Right Hand (CW) |
| Cover End Flow @ RPM |
3520VQ38A11-11BB20 |
| Shaft End RPM [Max |
3 |
| Shaft Type |
Flange |
| Mounting |
N/A |
| Minor Diameter [Max |
Standard Pilot |
| Rotation |
1.25 in |
| Model No. |
14 Tooth Splined |
| Pilot Type |
3520VQ |
| Major Diameter [Max |
1 15/16 in |
| Port Size |
Buna-N |
| Port Orientation - Shaft End |
2400 |
| Major Diameter [Min |
1.04 in |
| Shaft Length |
SAE C, 2 Bolt |
| Controlled Flow Rate |
Single Shaft Seal |
| Pump Series |
12/24 |
| Spline Description |
2500 |
| Shaft End Flow @ RPM |
2400 |
| Shaft Key |
N/A |
| Mounting Flange |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Max. RPM [Max |
1.248 in |
| Seal Material |
1.247 in |
| Displacement Cover End (cu in/revolution) |
N/A |
| Port Type |
N/A |
| Manufacturer Part No. |
N/A |
| Integral Valve Configuration |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Relief Valve Setting |
3520VQ38A11-11BB20 |
| Shaft Seal Type |
3000 |
| Minor Diameter [Min |
3000 |
| GPM @ 1,800 rpm, Cover End |
16.5 |
| Pressure Port Size, Cover End |
57 |
| Minor Diameter |
w/o Integral Valves |
| Displacement Shaft End (cu in/revolution) |
Outlet 45° CCW from Inlet |
| Cover End RPM [Max |
Outlet 90° CCW from Inlet |
| Shaft Dia. |
3/4 in Flange |
| GPM @ 1,800 rpm, Shaft End |
1 1/4 in Flange |
| Cover End Pressure [Max |
2.22 |
| Pressure Port Size, Shaft End |
7.42 |